Bedienungsanleitung Scheppach CRS450-20ProS (Seite 20 von 76) (Deutsch, Englisch, Französisch, Polnisch)

781445

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58

20 | GB

• Do not saw any materials (e.g. lead-based

paints and coatings or materials containing as-

bestos) whose dust can be harmful.

Information on the rechargeable battery

Please observe the operating manual for the re-

chargeable batteries.

Information on the charging unit and charging

process

Please observe the operating manual for the charg-

ing unit.

Warning! This electric tool generates an electro-

magnetic eld during operation. This eld can im-

pair active or passive medical implants under certain

conditions. In order to prevent the risk of serious

or deadly injuries, we recommend that persons with

medical implants consult with their physician and the

manufacturer of the medical implant prior to operat-

ing the electric tool

Residual risks

Even if properly operating and handling this electric

tool, some residual risks will remain. Due to its con-

struction and build, this electric tool may present the

following hazards::

• Lung damage, if suitable respiratory protection is

not worn;

• Cuts;

• Ear damage if working without ear protection;

• Damage to your health caused by swinging your

hands and arms when operating the appliance for

longer periods of time or if the unit is not held or

maintained properly.

• Furthermore, despite all precautions having been

met, some non-obvious residual risks may still re-

main.

• Residual risks can be minimised if the „safety in-

structions“ and the „Proper use“ are observed

along with the whole of the operating instructions.

• Avoid accidental starting of the machine.

• Use the tool that is recommended in this manual.

This ensures that your machine performs optimally.

• Hands may never enter the processing zone when

the machine is in operation.

6. Technical data

Motor power supply: 20 V

Rated speed: 3000 min-1

Stroke length: 20 mm

Weight 2 kg

Subject to technical changes!

• Do not open up the battery and avoid mechani-

cal damage to the battery. Risk of short circuit

and fumes may be emitted that irritate the res-

piratory tract. Ensure fresh air and seek medical

assistance in the event of discomfort.

• Do not use non-rechargeable batteries. This

could damage the appliance.

Special safety instructions for reciprocating

saws

• Hold the electric tool by the insulated gripping

surfaces when performing work in which the

cutting tool may come into contact with hidden

wiring. Contact with a live wire can also cause a

charge in metal parts of the device and result in an

electric shock.

• Keep hands away from the sawing area. Do not

reach underneath the work piece. Upon contact

with the blade there is a risk of injury.

• Only when the electric tool is turned on should

the sawing blade be moved against the work

piece. There is a risk of kickback if the tool insert

jams in the work piece.

• Make sure that the base plate is securely placed

against the work piece during sawing. The saw

blade can tilt and lead to loss of control over the

power tool.

• After you have nished work, turn the power

tool off and do not pull the saw blade out of the

cut until it has come to a standstill. In this way

you will avoid any kickback and can safely put own

the power tool.

• Use only undamaged saw blades in perfect

condition. Bent or blunt blades can break, ad-

versely affect the cut or cause kickback.

• Do not brake the saw blade after switching the

device off by applying side pressure. The saw

blade may be damaged, break or cause a kickback.

• Tighten the material rmly. Do not support the

work piece by hand or foot. Do not touch any

objects or the ground with the saw running.

There is a risk of kickback.

• Use suitable detectors in order to nd hidden

supply lines or ask the local utility company.

Contact with electrical cables can lead to electric

shock and re, contact with a gas pipe can result in

an explosion. Damage to a water pipe can lead to

property damaged and electric shock.

• Hold the power tool tightly with both hands

while working and ensure a secure footing.

The power tool is guided more securely with both

hands.

• Secure the work piece. A work piece that is re-

tained with clamping devices or a vice is held more

securely than with your hand.

• Wait until the power tool has stopped before

placing it down. The tool insert can tilt and lead to

loss of control over the power tool.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach CRS450-20ProS Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info