Bedienungsanleitung Scheppach CRS450-20ProS (Seite 22 von 76) (Deutsch, Englisch, Französisch, Polnisch)

781445

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58

22 | GB

Switching on and off

Ensure your stance is stable and hold the device

tightly with both hands and away from your body. Be-

fore switching the device on, ensure it is not in con-

tact with the work piece.

Switching on:

1. Ensure that the battery (11) is inserted (see “Re-

moving/inserting the battery”).

2. Press the switch lock (9) and the on/off switch (8),

then release the switch lock (9).

3. By using the on/off switch (8) you can progres-

sively control the stroke rate.

Gentle pressure: low stroke rate.

Greater pressure: higher stroke rate.

The on/off switch cannot be locked.

Switching off:

4. Release the on/off switch (8).

Adjusting the base plate

To adapt to the work piece, the base plate can be

adjusted and swivelled to 4 positions.

1. Press the adjusting button (5).

2. The base plate (2) can now be adjusted to the de-

sired position. It can now be felt locking into place.

3. The base plate (2) can be pivoted by applying light

pressure.

Switching on/off the oscillating function

To improve the progress of the sawing process, an

oscillating motion can be switched on.

Sawing without oscillation:

• For thin, hard work pieces such as wooden boards.

• In order to achieve cleaner cut edges.

Sawing with oscillation:

• For processing work pieces with medium and soft

strength, such as soft and hard wood, tree wood,

insulation material.

Switching on the oscillating function:

1. Turn the rotary switch (6) to position “1”.

Switching off the oscillating function:

2. Turn the rotary switch (6) to position “0”.

Conventional sawing:

1. Turn the device on. Before switching the device

on, ensure it is not in contact with the work piece.

2. Place the base plate on the work piece.

3. Cut with a uniform forward motion. You can saw

horizontally (see ), diagonally or vertically (see ).

4. After completion of the work, rst remove the

blade from the saw cut and then switch the device

off.

Plunge sawing:

Plunge cuts are technically more demanding and har-

bour a greater risk. Only perform this work if you are

familiar with this technique.

Plunge cuts may only be carried out in soft ma-

terials such as wood or plasterboard and with

short blades (max. length 150 mm). There is a

risk of kickback and personal injury.

1. Place the front edge of the base plate (2) on the

work piece so that the saw blade (1) does not

touch the work piece.

2. Turn the device on and let the saw blade (1) slowly

plunge into the work piece.

3. When the work piece depth has been cut through,

continue sawing as usual.

Flush separation:

With elastic bi-metal saw blades (see spare parts/

accessories) you can separate water pipes, for ex-

ample, ush to the wall.

Make sure that the blade is always longer than

the pipe diameter. There is a risk of kickback and

personal injury.

9. Cleaning

Danger!

Always pull out the battery pack before starting any

cleaning work.

Cleaning

• Keep all safety devices, air vents and the motor

housing free of dirt and dust as far as possible.

Wipe the equipment with a clean cloth or blow it

with compressed air at low pressure.

• We recommend that you clean the device immedi-

ately each time you have nished using it.

• Clean the equipment regularly with a moist cloth

and some soft soap. Do not use cleaning agents

or solvents; these could attack the plastic parts of

the equipment. Ensure that no water can seep into

the device. The ingress of water into an electric tool

increases the risk of an electric shock.

10. Storage

Store the device and its accessories in a dark, dry

and frost-proof place that is inaccessible to children.

The optimum storage temperature is between 5 and

30˚C. Store the electrical tool in its original packag-

ing. Cover the electrical tool in order to protect it from

dust and moisture. Store the operating manual with

the electrical tool.

11. Maintenance

There are no parts inside the equipment which re-

quire additional maintenance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach CRS450-20ProS Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info