Bedienungsanleitung Scheppach CSD40-20Li (Seite 19 von 88) (Deutsch, Englisch, Französisch, Polnisch)

782591

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58

19 | GB

7. Safety information

m WARNING Read all safety warnings and all in-

structions.

Failure to follow the warnings and instructions may

result in electric shock, re and/or serious injury.

Workplace safety

a) Keep your working area clean and well lit. Untidy or

poorly lit working areas can lead to accidents.

b) Do not work with the device in potentially explosive

environments in which there are inammable liquids,

gases or dusts. Electrical power tools create sparks,

which can ignite dusts or fumes.

c) Keep children and other people away while you are

operating the electrical tool. Distractions can cause

you to lose control of the device.

2. Electrical safety

a) The mains plug on the device must match the

mains socket. The plug must not be modied in any

way. Do not use

plugs and matching sockets reduce the risk of electric

shock.

b) Avoid touching earthed surfaces such as pipes, ra-

diators, ovens and refrigerators with any part of your

body.

There is an increased risk of electric shock if your

body is earthed.

c) Keep the device away from rain or moisture. Wa-

ter entering an electrical device increases the risk of

electric shock.

d) Do not use the mains lead for any purpose for

which it was not intended, e.g. to carry the device,

to hang up the device or to pull the mains plug out

of the mains socket. Keep the mains lead away from

heat, oil, sharp edges or moving parts of the device.

Damaged or tangled mains leads increase the risk of

electric shock.

e) When working outdoors with an electrical power

tool always use extension cables that are also ap-

proved

for use outdoors. The use of an extension cable suita-

ble for outdoor use reduces the risk of electric shock.

f) Use a residual current device (RCD) for protection

if operating the electrical power tool in a moist envi-

ronment

is unavoidable. The use of an RCD reduces the risk

of electric shock.

3. Personal safety

a) Remain alert at all times, watch what you are do-

ing and always proceed with caution. Do not use the

device if

you are tired or under the inuence of drugs, alcohol

or medication. One moment of carelessness when

using the device can lead to serious injury.

b) Wear personal protective equipment and always

sound pressure level LpA 83,14dB(A) (EN ISO

11201)

uncertainty Kwa/pA 3 dB(A)

Vibration value

Vibration ah 2,06 m/s²

Uncertainty Kh 1,5 m/s²

4. Scope of delivery

• drill bits ,

• 1pc holder

• 1pc exible ,

• 2*2AH battery

• 1pc Charger (4A charger )

• Translation of original instruction manual

5. Unpacking

• Open the packaging and remove the device care-

fully.

• Remove the packaging material as well as the

packaging and transport bracing (if available).

• Check that the delivery is complete.

• Check the device and accessory parts for trans-

port damage. Inform the transport agent imme-

diately of any faults. Later complaints cannot be

considered.

• If possible, store the packaging until the warranty

period has expired.

• Familiarize yourself with the machine with the help

of the operating instructions manual before using

it.

• Use only original parts for accessories as well as

consumables and spare parts. Spare parts can be

obtained from your scheppach retailer.

• Please quote our article numbers as well as type

and production year in all your orders.

m ATTENTION

The device and packaging materials are not toys!

Children must not be allowed to play with plas-

tic bags, lm and small parts! There is a risk of

swallowing and suffocation!

6. Construction

Warning!

Always remove the battery pack before making

adjustments to the equipment.

Be sure to read the following information before you

put the cordless equipment into operation:

• Charge the battery pack with the charger. An empty

battery pack requires a charging period of approxi-

mately 0.5 to 1 hour.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach CSD40-20Li Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info