Bedienungsanleitung Scheppach CSE2400 (Seite 27 von 108) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

781698

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

27GB

• Carry the chain saw by the front handle with

the chain saw switched off and away from

your body. When transporting or storing the

chain saw always t the guide bar cover. Proper

handling of the chain saw will reduce the Iikelihood

of accidentaI contact with the moving saw chain.

• Follow instructions for lubricating, chain

tensioning and changing accessories.

Improperly tensioned or lubricated chain may either

break or increase the chance for kickback.

• Keep handles dry, clean, and free from oil and

grease. Greasy, oily handles are slippery causing

loss of control.

• Cut wood only. Do not use chain saw for

purposes not intended. For example: do not

use chain saw for cutting plastic, masonry or

nonwood building materials. Use of the chain

saw for operations different than intended could

result in a hazardous situation.

Causes and operator prevention of kickback

Beware of kickback!

• Kickback may occur when the nose or tip of the

guide bar touches an object, or when the wood

closes in and pinches the saw chain in the cut.

• Tip contact in some cases may cause a sudden

reverse reaction, kicking the guide bar up and back

towards the operator.

• Pinching the saw chain along the top of the guide

bar may push the guide bar rapidly back towards

the operator.

• Either of these reactions may cause you to lose

control of the saw which could result in serious

personal injury. Do not rely exclusively upon the

safety devices built into your saw.

• As a chain saw user, you should take several steps

to keep your cutting jobs free from accident or injury.

• Kickback is the result of tool misuse and/ or

incorrect operating procedures or conditions and

can be avoided by taking proper precautions as

given below:

• Maintain a rm grip, with thumbs and ngers

encircling the chain saw handles, with both hands

on the saw and position your body and arm to allow

you to resist kickback forces (Fig. L).

• Kickback forces can be controlled by the operator,

if proper precautions are taken. Do not let go of the

chain saw.

• Do not overreach and do not cut above shoulder height.

• This helps prevent unintended tip contact

and enables better control of the chain saw in

unexpected situations.

• Only use replacement bars and chains specied by

the manufacturer.

• Incorrect replacement bars and chains may cause

chain breakage and/or kickback.

• Follow the manufacturer´s sharpening and

maintenance instructions for the saw chain.

• Decreasing the depth gauge height can lead to

increased kickback.

Additional safety informations

• If the power cable for this equipment is damaged, it

must be replaced by the manufacturer, a customer

service agent of the same or a similarly qualied

person in order to prevent hazards.

• Lay the extension cable in such a way that it will

not be caught by branches or similar during sawing.

• Use a surge protector with a release current of 30

mA or less.

• Have your power tool serviced by a qualied repair

person using only identical replacement parts.

• Carefully follow the maintenance, control and

service instructions in this manual.

• Practise using the saw (sawing logs on a sawhorse) and

get an experienced user or a specialist to explain to you

the function of the saw, the way of working, the techniques

of sawing and the personal protection equipment.

6. Technical data

Technical data

Cutting data Chainsaw

cutting lenght mm 440

bar lenght mm 457

capacity oiltank l 0,28

type of oil wear resistant oil

saw chain division 3/8"

drive link thickness 1,27mm

saw chain type Oregon

91PX062X

number of teeths drive

sprocket

tooth pitch of drive

sprocket

3/8"

chain brake yes

guide bar type Oregon

180SDEA041

engine

motor V/Hz 230-240V / 50 Hz

power W 2400

rotation speed max. min-1 8000

Weight kg 5,0

Subject to technical changes!

Information concerning noise emission measured

according to relevant standards:

Sound pressure LpA = 89,3 dB(A)

Sound power LWA = 100,3 dB(A)

guaranteed Sound power LWA = 108 dB(A)

Uncertainty KPA = 2,5 dB(A)

Wear ear-muffs.

The impact of noise can cause damage to hearing.

Vibration Ahv (front handle) = 7,618 m/s2

Vibration Ahv (rear handle) = 4,633 m/s2

Uncertainty KPA = 1,5 m/s2

• The specied vibration emission value has been

measured according to a standardised testing

procedure and can be used for comparison of one

electric tool with another;

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach CSE2400 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info