Bedienungsanleitung Scheppach CSE2500 (Seite 26 von 200) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

781410

Zoom out

Zoom in

Vorherige Seite

1/200

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

26 | GB

4. Intended use

The machine meets the currently valid EU machine

directive.

Before starting any work, all protective and safety de-

vices must be in place.

• The machine has been designed to be operated by

one person.

• The operator is responsible for third parties in the

area of operations.

• All safety and hazard notices on the machine must

be observed.

• All safety and hazard notices on the machine must

be kept in a completely legible condition.

• Use the machine in a technically awless condition

only, as well as for its intended purpose, in a safe

manner and being aware of dangers, in compliance

with the operating instructions!

• Disruptions which can affect safety in particular

must be eliminated straight away!

• The manufacturer’s safety, operation and main-

tenance instructions as well as the technical data

given in the calibrations and dimensions must be

adhered to.

• Relevant accident prevention regulations and other

generally recognized safety and technical rules

must also be adhered to.

• The machine may only be used, maintained or re-

paired by trained persons who are familiar with the

machine and have been informed about the dan-

gers. Unauthorized modications of the machine

exclude a liability of the manufacturer for damages

resulting from the modications.

• The machine is intended for use only with original

spare parts and original tools from the producer.

• Any other use is considered to be not intended. The

manufacturer excludes any liability for resulting

damages, the risk is exclusively borne by the user.

• The device must not be used for commercial, tech-

nical or industrial applications.

• If you are not sure whether working conditions are

safe or unsafe, do not work with the machine.

• The chainsaw has been designed to cut wood and

smaller trees with a diameter not bigger than the

chain bar length.

Warning!

For your own safety, please thoroughly read this man-

ual and the general safety instructions before turning

the device on. If you give the device to third parties,

always include these instructions.

Please note that our equipment has not been de-

signed for use in commercial, trade or industri-

al applications. Our warranty will be voided if the

equipment is used in commercial, trade or industrial

businesses or for equivalent purposes.

5. Safety information

Please read all instructions before working with

this tool.

When using electric tools basic safety precautions

should always be followed to reduce the risk of re,

electric shock and personal injury.

Please read all instructions and warnings carefully.

Non-compliance with instructions and warnings can

lead to electric shock, re and/or serious injuries.

Please store instructions and warnings safely. The

term "device" refers to electrically operated devices,

either powered by mains operation (with mains cable)

or battery powered (without mains cable).

General notes on safety

• Before you do any work with the electric chainsaw,

make yourself familiar with all operating parts.

• Practise using the saw (sawing logs on a saw-

horse) and get an experienced user or a specialist

to explain to you the function of the saw, the way of

working, the techniques of sawing and the personal

protection equipment.

• Observe the noise protection and local regulations

for woodcuts.

• Local regulations may require a qualifying exami-

nation. Contact the forest administration.

General safety instructions for power tools

1. Work area safety

• Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

• Do not operate power tools in explosive atmos-

pheres, such as in the presence of ammable

Iiquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

• Keep children and bystanders away while op-

erating a power tool. Distractions can cause you

to lose control.

2. Electrical safety

• Power tool plugs must match the outlet. Nev-

er modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodied plugs and matching outlets will

reduce risk of electric shock

• Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

• Do not expose power tools to rain or wet condi-

tions. Water entering a power tool will increase the

risk of electric shock.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach CSE2500 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info