Bedienungsanleitung Scheppach DB2000 (Seite 16 von 36) (Deutsch, Englisch, Französisch)

781887

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

16 | GB

We accept no liability for damage or accidents which

arise due to non-observance of these instructions

and the safety information.

2. Device description(Fig. A - E)

1. Motor housing

2. On / Off switch

3. Handle

4. Oil ll opening / sight glass

5. Additional handle

6. Tool holder

7. Point chisel

8. Locking bolt

9. Clamping screw

10. Locking screw

3. Scope of delivery

• (1x) Demolition Hammer

• (1x) Point chisel

• (1x) Flat chisel

• (1x) Oil can

• (1x) Carrying case

• (1x) Mounting key

• (2x) Carbon brushes

• (1x) Operating manual

4. Proper use

The machine is intended for heavy chiselling and

demolition work as well as for driving in and compact-

ing with the appropriate accessories.

The equipment is allowed to be used only for its pre-

scribed purpose. Any other use is deemed to be a

case of misuse. The user/operator and not the manu-

facturer will be liable for any damage or injuries of any

kind resulting from such misuse.

An element of the intended use is also the obser-

vance of the safety instructions, as well as the as-

sembly instructions and operating information in the

operating manual.

Persons who operate and maintain the machine must

be familiar with the manual and must be informed

about potential dangers.

In addition, the applicable accident prevention regula-

tions must be strictly observed.

Other general occupational health and safety-related

rules and regulations must be observed.

The liability of the manufacturer and resulting dam-

ages are excluded in the event of modications of the

machine.

The machine may be operated only with original parts

and original accessories of the manufacturer.

The safety, work and maintenance instructions of the

manufacturer as well as the dimensions indicated in

the Technical Data section must be adhered to.

1. Introduction

Manufacturer:

scheppach

Fabrikation von Holzbearbeitungsmaschinen GmbH

Günzburger Straße 69

D-89335 Ichenhausen

Dear customer,

We hope your new tool brings you much enjoyment

and success.

Note:

According to the applicable product liability laws, the

manufacturer of the device does not assume liability

for damages to the product or damages caused by

the product that occurs due to:

• Improper handling

• Non-compliance of the operating instructions

• Repairs by third parties, not by authorized ser-

vice technicians▪Installation and replacement of

non-original spare parts

• Application other than specied

• A breakdown of the electrical system that occurs

due to the non-compliance of the electric regu-

lations and VDE regulations 0100, DIN 57113 /

VDE0113

We recommend:

Read through the complete text in the operating in-

structions before installing and commissioning the

device. The operating instructions are intended to

help the user to become familiar with the machine

and take advantage of its application possibilities in

accordance with the recommendations.

The operating instructions contain important informa-

tion on how to operate the machine safely, profes-

sionally and economically, how to avoid danger, cost-

ly repairs, reduce downtimes and how to increase

reliability and service life of the machine.

In addition to the safety regulations in the operating

instructions, you have to meet the applicable regu-

lations that apply for the operation of the machine in

your country. Keep the operating instructions pack-

age with the machine at all times and store it in a

plastic cover to protect it from dirt and moisture. Read

the instruction manual each time before operating the

machine and carefully follow its information.

The machine can only be operated by persons who

were instructed concerning the operation of the ma-

chine and who are informed about the associated

dangers. The minimum age requirement must be

complied with.

In addition to the safety notes contained in the pres-

ent operating instructions and the special regulations

of your country, the generally recognized technical

rules for the operation of woodworking machines

must be observed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach DB2000 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info