Bedienungsanleitung Scheppach DB2000 (Seite 18 von 36) (Deutsch, Englisch, Französisch)

781887

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

18 | GB

• Always keep the connection cable from the working

area of the device. Always guide the cable back-

wards, away from the device!

• Do not machine any materials that present a dan-

ger to health (e.g. asbestos).

• When working in walls ceiling, or oor, take care to

avoid electric cables and gas or waterpipes.

• Please turn the device immediately off when the

tool used gets blocked! Do not turn the device

on again when the tool is still blocked. This could

cause bounce back with a high reaction moment.

Determine and remove the cause of the blocking

of the tool used while respecting the safety instruc-

tions.

• The possible causes may be:

- it is tilted in the workpiece to be machined

- it has pierced through the material to be ma-

chined

- the power tool is overloaded

• Do not reach into the machine while it is running.

• Chips and splinters must not be removed while the

machine is running.

m WARNING! Danger of burns

The insertion tool may become hot during use.

• when changing tools

• when setting the device down

m WARNING! This electric tool generates an electro-

magnetic eld during operation. This eld can impair

active or passive medical implants under certain con-

ditions. In order to prevent the risk of serious or dead-

ly injuries, we recommend that persons with medical

implants consult with their physician and the manu-

facturer of the medical implant prior to operating the

electric tool.

Residual risks

Even when this electric tool is used properly, re-

sidual risks still remain.

The following hazards may arise in connection

with the design and construction of this electric

tool:

• Lung damage if suitable dust protection mask is not

worn.

• Hearing damage if suitable hearing protection is

not worn.

• Damage to health resulting from hand/arm vibra-

tion if the device is used over an extended period

of time or if it is not properly operated and main-

tained..

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc.

in accordance with these instructions, taking into

account the working conditions and the work to

be performed. Use of the power tool for opera-

tions different from those intended could result in

a hazardous situation.

5. Service

a) Have your power tool serviced by a qualied

repair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained..

Appliance-Specic Safety Instructions for Ham-

mers

• Wear ear protectors. Exposure to noise can cause

hearing loss.

• Use auxiliary handle(s), if supplied with the tool.

Loss of control can cause personal injury.

• Hold power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory may contact hidden wiring or its own

cord. Cutting accessory contacting a “live” wire

may make exposed metal parts of the power tool

“live” and could give the operator an electric shock.

• Use suitable detectors to determine if utility lines

are hidden in the work area or call the local util-

ity company for assistance. Contact with elec-

tric lines can lead to re and electric shock.

Damaging a gas line can lead to explosion. Pene-

trating a water line causes property damage or may

cause an electric shock.

• When working with the machine, always hold it

rmly with both hands and provide for a secure

stance. The power tool is guided more secure with

both hands.

• Secure the workpiece. A workpiece clamped with

clamping devices or in a vice is held more secure

than by hand.

• Wear a dust mask.

Additional Safety and Working Instructions

Warning

• Do not overreach. Keep proper footing and balance

at all times.

• Use protective equipment. Always wear safety

glasses when working with the machine. The use of

protective clothing is recommended, such as dust

mask, protective gloves, sturdy non-slip footwear

and ear defenders.

• The dust produced when using this tool may be

harmful to health. Do not inhale the dust. Use a

dust absorption system and wear a suitable dust

protection mask. Remove deposited dust thorough-

ly, e.g. with a vacuum cleaner.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach DB2000 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info