Bedienungsanleitung Scheppach DB2000 (Seite 19 von 36) (Deutsch, Englisch, Französisch)

781887

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

GB | 19

• Do not overload the appliance.

• Have the appliance serviced whenever necessary.

• Switch the appliance off when it is not in use.

• Wear protective gloves.

7. Unpacking

m WARNING!

The device and packaging materials are not toys!

Children must not be allowed to play with plas-

tic bags, lm and small parts! Risk of swallowing

and suffocation!

• Open the packaging and remove the device care-

fully.

• Remove the packaging material as well as the

packaging and transport bracing (if available).

• Check that the delivery is complete.

• Check the device and accessory parts for trans-

port damage. When complaints the dealer must be

informed immediately. Subsequent complaints will

not be accepted.

• If possible, store the packaging until the warranty

period has expired.

• Read the operating instructions to make yourself

familiar with the device prior to using it.

• Only use original parts for accessories as well as

for wearing and spare parts. Spare parts are avail-

able from your specialized dealer.

• Specify our part numbers as well as the type and

year of construction of the device in your orders.

8. Before getting started

Make sure before starting that the data on the type

plate coincide with the mains specications.

Always disconnect the power supply before making

any adjustments to the device

• Get to know your machine. Familiarise yourself with

its application and limitations, as well as the specif-

ic potential hazards.

• Make sure that the switch is OFF before inserting

the plug into the socket.

• Make sure that the machine is assembled com-

pletely and properly.

• Check the machine before use for damaged parts

and determine whether these parts work properly

and perform its intended function; in case of doubt,

the part is to be replaced.

• Check the alignment of all moving parts, broken or

mounting parts, and other conditions that could im-

pair proper operation. Any damaged part should be

repaired or replaced by a qualied technician.

• Do not use the machine if a switch cannot be

switched on and off correctly.

m CAUTION! Before beginning the operation, check

the installation site for concealed electrical cables,

gas and water pipes using a pipe locator.

6. Technical Data

Dimensions

(L x B x H) mm

652 x 157 x 276

Stroke rate 1/min 2000

Impact force Joule 50

Weight kg 16

Motor V/Hz 220 - 230 V~ / 50 Hz

Rated input P1 W 1700

Protection class II

Protection category IP20

Chuck SDS-HEX System 30 mm

Technical changes reserved!

Noise & vibration

m WARNING: Noise can have serious effects on

your health. If the machine noise exceeds 85 dB (A),

please wear suitable hearing protection.

Noise data

Sound power level LWA 101,13 dB(A)

Sound pressure level LpA 81,13 dB(A)

Uncertainty Kwa/pA 2,73 dB(A)

Wear protective ear protection

Excessive noise can result in a loss of hearing. Total

vibration values (vector sum of three directions) de-

termined according to EN 60745.

Main Handle:

Vibration emissions value

ah, Cheq = 18,652 m/s2

Uncertainty K = 1,5 m/s2

Additional handle:

Vibration emissions value

ah, Cheq = 14,992 m/s2

Uncertainty K = 1,5 m/s2

Additional information for electric power tools

m WARNING!

The specied vibration value was established in ac-

cordance with a standardized testing method. It may

change according to how the electric equipment is

used and may exceed the specied value in excep-

tional circumstances. The specied vibration value

can be used to compare the equipment with other

electric power tools. The specied vibration value

can be used for initial assessment of a harmful effect.

Keep the noise emissions and vibrations to a

minimum!

• Only use appliances which are in perfect working

order.

• Service and clean the appliance regularly.

• Adapt your working style to suit the appliance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach DB2000 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info