Bedienungsanleitung Scheppach DBS800 (Seite 12 von 88) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

781682

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58

12 І GB

 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58

Device Description (Fig. A)

1. Clearance angle guide

2. Clamping button

3. Setting guide

4. Clamping chuck

5. Limiting hook

6. Locking grip

7. Main cutting edge milling guide

8. Guide bracket

9. End cap, top

10. End cap, front

11. Device fuse

12. On/Off switch

13. Grinding dust cover

Unpacking

• Open the packaging and remove the device care-

fully.

• Remove the packaging material as well as the

packaging and transport bracing (if available).

• Check that the delivery is complete.

• Check the device and accessory parts for trans-

port damage.

• If possible, store the packaging until the warranty

period has expired.

ATTENTION

The device and packaging materials are not toys!

Children must not be allowed to play with plas-

tic bags, lm and small parts! There is a risk of

swallowing and suffocation!

Intended use

The drill grinder is suitable for grinding of HSS E,

HSS, CrV or WS twist drills of 3.0 – 13.0 mm with a

point angle of 118°.

The device is not intended for all other types of appli-

cations (e.g. grinding with unsuitable grinding tools,

grinding with a coolant solution, grinding hazardous

materials such as asbestos).

The equipment is intended for use in the eld of DIY.

It is not designed for commercial use.

The equipment is designed for use by adults. Young

people under the age of 16 are permitted to use the

equipment only under supervision.

The manufacturer shall not be liable for damages

caused by use other than for the intended purpose

or by incorrect operation.

m Please note that our equipment has not been de-

signed for use in commercial, trade or industrial ap-

plications. Our warranty will be voided if the machine

is used in commercial, trade or industrial businesses

or for equivalent purposes.

Introduction

MANUFACTURER:

scheppach Fabrikation von

Holzbearbeitungsmaschinen GmbH

Günzburger Straße 69

D-89335 Ichenhausen

DEAR CUSTOMER,

We hope your new tool brings you much enjoyment

and success.

NOTE:

According to the applicable product liability laws, the

manufacturer of the device does not assume liability

for damages to the product or damages caused by

the product that occurs due to:

• Improper handling,

• Non-compliance of the operating instructions,

• Repairs by third parties, not by authorized service

technicians,

• Installation and replacement of non-original spare

parts,

• Application other than specied,

• A breakdown of the electrical system that occurs

due to the non-compliance of the electric regu-

lations and VDE regulations 0100, DIN 57113 /

VDE0113.

WE RECOMMEND:

Read through the complete text in the operating in-

structions before installing and commissioning the

device. The operating instructions are intended to

help the user to become familiar with the machine

and take advantage of its application possibilities in

accordance with the recommendations. The operat-

ing instructions contain important information on how

to operate the machine safely, professionally and

economically, how to avoid danger, costly repairs, re-

duce downtimes and how to increase reliability and

service life of the machine.

In addition to the safety regulations in the operating

instructions, you have to meet the applicable regula-

tions that apply for the operation of the machine in

your country. Keep the operating instructions pack-

age with the machine at all times and store it in a

plastic cover to protect it from dirt and moisture. Read

the instruction manual each time before operating

the machine and carefully follow its information. The

machine can only be operated by persons who were

instructed concerning the operation of the machine

and who are informed about the associated dangers.

The minimum age requirement must be complied

with. In addition to the safety requirements in these

operating instructions and your country’s applicable

regulations, you should observe the generally rec-

ognized technical rules concerning the operation of

woodworking machines.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach DBS800 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info