Bedienungsanleitung Scheppach DBS800 (Seite 13 von 88) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

781682

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58

GB І 13

 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58

• If working with the power tool in a damp location

cannot be avoided, use a ground fault circuit inter-

rupter. The use of a ground fault circuit interrupter

reduces the risk of electric shock. Always check

whether the mains voltage complies with the volt-

age specied on the nameplate of the power tool.

Personal safety

• Stay alert. Watch what you are doing and use com-

mon sense when operating a power tool. Do not

use the power tool while you are tired or under

the inuence of drugs, alcohol or medication. A

moment of inattention while operating power tools

may result in serious personal injury.

• Use personal protective equipment. Always wear

safety glasses. Safety equipment such as a dust

mask, non-skid safety shoes, a hard hat or ear

protection depending on the type and use of the

power tool will reduce personal injuries.

• Prevent unintentional starting. Ensure that the

power tool is switched off before connecting it to

the power supply and/or battery, picking it up or

carrying the tool. Carrying power tools with your

nger on the switch or energizing power tools that

have the switch on invite accidents.

• Remove any adjusting tool or wrench before turn-

ing the power tool on. A wrench or a key which has

been left attached to a rotating part may induce

personal injury. Do not overreach. Keep proper

footing and balance at all times. This enables you

to better control the power tool in situations which

cannot be foreseen.

• Dress properly. Do not wear loose clothing or jew-

ellery. Keep your hair, clothing and gloves away

from moving parts. Loose clothes, jewellery or long

hair may get caught in moving parts.

• If dust extraction and collection units are installed,

make sure that these are connected and properly

used. Using such devices reduces hazards asso-

ciated with dust.

Power tool use and care

• Do not force the power tool. Use the correct power

tool for your application. With the correct power tool

you will do the job better and safer at the specied

power rate.

• Do not use the power tool if it has a defective switch.

A power tool, which cannot be turned on or off with

the switch, is dangerous and must be repaired.

• Unplug the power cord from the outlet and/or re-

move the battery before making any adjustments to

the tool, changing accessories, or storing the pow-

er tool. Such preventive safety measures prevent

starting the tool accidentally.

• Store idle power tools out of children’s reach. Do

not allow persons unfamiliar with the tool or these

instructions to operate the power tool. Power tools

are dangerous in the hands of untrained users.

General safety instructions for electric

tool

CAUTION: Read all safety regulations and in-

structions.

Any failures made in following the safety regulations

and instructions may result in an electric shock, re

and/or serious injury.

Keep all safety regulations and instructions in a

safe place for future use.

The term “electric tool” used in the safety instruc-

tions refers to electric tools operated from the mains

power supply (with a power cable) and to battery op-

erated electric tools (without a power cable).

Warning! This electric tool generates an electro-

magnetic eld during operation. This eld can im-

pair active or passive medical implants under certain

conditions. In order to prevent the risk of serious

or deadly injuries, we recommend that persons with

medical implants consult with their physician and the

manufacturer of the medical implant prior to operat-

ing the electric tool.

Workplace

• Keep your work area clean and tidy. Cluttered and

dark working areas are accident-prone.

• Do not operate power tools in explosive atmos-

pheres, where ammable liquids, gases or dust

are present. Power tools generate sparks which

may ignite the dust or fumes.

• Keep children and other persons away while op-

erating a power tool. Distractions can be a reason

for losing control of the tool.

Electrical safety

• Power tool plugs must match the outlet. Do not

modify the plug in any way. Do not use any adapt-

er plugs with grounded devices. Unmodied plugs

and matching outlets will reduce the risk of elec-

tric shock.

• Avoid physical contact with grounded surfaces

such as pipes, radiators, ranges and refrigera-

tors. If your body is grounded the risk of an elec-

tric shock increases.

• Do not expose the power tool to rain or wet condi-

tions. Water that enters a power tool will increase

the risk of electric shock.

• Do not abuse the cord; do not use the cord to carry

or hang up the power tool or to unplug the power

tool from the mains. Keep the power cord away

from heat, oil, sharp edges or the power tool’s

moving parts. Damaged or tangled power cords

will increase the risk of electric shock.

• When operating a power tool outdoors, use only

extension cords that are approved for outdoor use.

The use of an extension cord that is adapted for

outdoor use reduces the risk of electric shock.

Scheppach DBS800 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info