Bedienungsanleitung Scheppach DC100 (Seite 19 von 64) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

781451

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

www.scheppach.com GB | 19

• Remove the packaging material, as well as the pack-

aging and transport safety devices (if present).

• Check whether the scope of delivery is complete.

• Check the device and accessory parts for transport

damage. In the event of complaints the carrier must

be informed immediately. Later claims will not be

recognised.

• If possible, keep the packaging until the expiry of the

warranty period.

• Familiarise yourself with the product by means of the

operating instructions before using for the rst time.

• With accessories as well as wearing parts and re-

placement parts use only original parts. Replace-

ment parts can be obtained from your dealer.

• When ordering please provide our article number as

well as type and year of manufacture for your equip-

ment.

8. Assembly / Before commissioning

m ATTENTION!

Always make sure the device is fully assembled

before commissioning!

8.1 Installing the lter cartridge (10) with lter bag

(11), Fig. 3 - 5

• Insert the lter cartridge (10) into the lter bag (11).

(Fig. 3 + 4)

• Press the overhang into the lter cartridge (10). (Fig.

• Now t the lter cartridge (10) on the engine housing

(1). (Fig. 5)

• Place the complete engine housing (1) on the con-

tainer (3) and lock the locking hooks (9).

8.2 Installing the suction hose (5), Fig. 6 + 7

• Fit the suction hose (5) with the hose clamp (8) on

the hose port of the container (3).

• Fit the other side of the suction hose (5) with the

hose clamp (8) and hose coupling (7).

9. Start up

m ATTENTION!

Always make sure the device is fully assembled

before commissioning!

9.1 Switching on/o󰀨, Fig. 1

• To switch on, set the ON/OFF switch (4) to position “I”.

• To switch the device o󰀨 again, set the ON/OFF

switch (4) to position “0”.

• Risk to health due to noise. The permissible noise

level is exceeded during operations. It is essential

that personal protective equipment, such as hearing

protection, is worn.

• Hazard due to electrical power, with the use of im-

proper electrical connection cables.

• Furthermore, despite all precautions having been

met, some non-obvious residual risks may still re-

main.

• Residual risks can be minimised if the “safety in-

structions” and the “Proper use” are observed along

with the whole of the operating instructions.

Ensure careful storage of the safety instructions.

6. Technical data

Suction port, connection Ø 100 mm

Hose length 2000 mm

Air power 215 m³/h

Pressure di󰀨erence 25000 Pa

Filter surface 0.3 m²

Container volume 65 l

Weight 5 kg

Electric motor 220 - 240 V~

50/60 Hz

Rated input 1200 W

Motor speed 35000 min-1

Technical changes reserved!

Noise and vibration

m Warning: Noise can have serious e󰀨ects on your

health. If the machine noise exceeds 85 dB (A), please

wear suitable hearing protection.

7. Unpacking

m ATTENTION!

The device and the packaging material are not

children‘s toys! Do not let children play with plas-

tic bags, lms or small parts! There is a danger of

choking or su󰀨ocating!

• Open the packaging and carefully remove the de-

vice.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach DC100 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info