Bedienungsanleitung Scheppach DC100 (Seite 20 von 64) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

781451

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

www.scheppach.com

20 | GB

Clean the device at regular intervals using a damp

cloth and a little soft soap. Do not use any cleaning

products or solvents; they could attack the plastic parts

of the device. Make sure that no water can penetrate

the device interior.

12. Storage

• Store the device and its accessories in a dark, dry

and frost-free place that is inaccessible to children.

• The optimum storage temperature lies between 5

and 30 ˚C.

• Store the tool in its original packaging.

• Cover the tool to protect it from dust or moisture.

• Store the operating manual with the tool.

13. Maintenance

Attention!

Disconnect the mains plug before carrying out any

maintenance work.

Connections and repairs

Connections and repair work on the electrical equip-

ment may only be carried out by electricians.

Please provide the following information in the

event of any enquiries:

• Type of current for the motor

• Machine data - type plate

• Engine data - type plate

Service information

With this product, it is necessary to note that the follow-

ing parts are subject to natural or usage-related wear,

or that the following parts are required as consuma-

bles.

Wearing parts*: Filter bag, lter cartridge

* may not be included in the scope of supply!

Spare parts and accessories can be obtained from our

Service Centre. Spare parts and accessories can be

obtained from our Service Centre.

10. Electrical connection

The electrical motor installed is connected and

ready for operation. The connection complies with

the applicable VDE and DIN provisions. The cus-

tomer‘s mains connection as well as the exten-

sion cable used must also comply with these reg-

ulations.

Damaged electrical connection cable

The insulation on electrical connection cables is often

damaged.

This may have the following causes:

• Pressure points, where connection cables are

passed through windows or doors.

• Kinks where the connection cable has been improp-

erly fastened or routed.

• Places where the connection cables have been cut

due to being driven over.

• Insulation damage due to being ripped out of the wall

outlet.

• Cracks due to the insulation ageing.

Such damaged electrical connection cables must not

be used and are life-threatening due to the insulation

damage.

Check the electrical connection cables for damage

regularly. Ensure that the connection cables are dis-

connected from electrical power when checking for

damage.

Electrical connection cables must comply with the ap-

plicable VDE and DIN provisions. Only use connection

cables of the same designation.

The printing of the type designation on the connection

cable is mandatory.

For single-phase AC motors, we recommend a fuse

rating of C 16A or K 16A for machines with a high start-

ing current (from 3000 watts)!

11. Cleaning

Attention!

Disconnect the mains plug before carrying out any

cleaning work.

We recommend that you clean the device directly after

every use.

Wipe swarf and dust o󰀨 the machine from time to time

with a cloth.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach DC100 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info