Bedienungsanleitung Scheppach Di1050 (Seite 13 von 56) (Deutsch, Englisch, Französisch, Polnisch)

782596

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58

GB І 13

Device description (Fig. 1)

1 Drilling/hammer-drilling selector switch

2 Gear selector switch

3 Depth stop

4 Depth stop release

5 Quick-release chuck

5a Front sleeve

5b Rear sleeve

6 Additional handle lock

7 Additional handle

8 Rotational direction switch

9 Speed adjustment dial

10 On/off switch

11 Handle

12 Locking knob for continuous running

Unpacking

• Open the packaging and remove the device care-

fully.

• Remove the packaging material as well as the

packaging and transport bracing (if available).

• Check that the delivery is complete.

• Check the device and accessory parts for trans-

port damage.

• If possible, store the packaging until the warranty

period has expired.

ATTENTION

The device and packaging materials are not toys!

Children must not be allowed to play with plas-

tic bags, lm and small parts! There is a risk of

swallowing and suffocation!

Intended use

The device is intended:

• for impact drilling in concrete, masonry or rocks,

• for drilling in wood, metal or plastic,

• for screwing in and loosening screws.

Any other use that is not explicitly approved in these

instructions may result in damage to the equipment

and represent a serious danger to the user.

For security reasons, the device is not intended

for children and young people under the age of 16.

Young people aged 16 and over may only use the

device under adult supervision. The device is not

designed for commercial use.

The manufacturer cannot be held liable for damage

when the appliance is not used in conformity with

its intended purpose or due to incorrect operation.

General Power Tool Safety Warnings

m WARNING!

Read all safety warnings and all instructions. Failure

to follow the warnings and instructions may result in

electric shock, re and/or serious injury.

Save all warnings and instructions for future ref-

erence.

The term „power tool“ in the warnings refers to your

mains-operated (corded) power tool or battery oper-

ated (cordless) power tool.

Introduction

MANUFACTURER:

scheppach Fabrikation von

Holzbearbeitungsmaschinen GmbH

Günzburger Straße 69

D-89335 Ichenhausen

DEAR CUSTOMER,

We hope your new tool brings you much enjoyment

and success.

NOTE:

According to the applicable product liability laws, the

manufacturer of the device does not assume liability

for damages to the product or damages caused by

the product that occurs due to:

• Improper handling,

• Non-compliance of the operating instructions,

• Repairs by third parties, not by authorized service

technicians,

• Installation and replacement of non-original spare

parts,

• Application other than specied,

• A breakdown of the electrical system that occurs

due to the non-compliance of the electric regu-

lations and VDE regulations 0100, DIN 57113 /

VDE0113.

WE RECOMMEND:

Read through the complete text in the operating in-

structions before installing and commissioning the

device.

The operating instructions are intended to help the

user to become familiar with the machine and take

advantage of its application possibilities in accord-

ance with the recommendations.

The operating instructions contain important infor-

mation on how to operate the machine safely, pro-

fessionally and economically, how to avoid danger,

costly repairs, reduce downtimes and how to in-

crease reliability and service life of the machine.

In addition to the safety regulations in the operating

instructions, you have to meet the applicable regula-

tions that apply for the operation of the machine in

your country.

Keep the operating instructions package with the

machine at all times and store it in a plastic cover to

protect it from dirt and moisture. Read the instruction

manual each time before operating the machine and

carefully follow its information. The machine can only

be operated by persons who were instructed con-

cerning the operation of the machine and who are in-

formed about the associated dangers. The minimum

age requirement must be complied with.

In addition to the safety requirements in these oper-

ating instructions and your country’s applicable regu-

lations, you should observe the generally recognized

technical rules concerning the operation of wood-

working machines.

GB Caution - Read the operating instructions to reduce the risk of inquiry

GB Wear safety goggles!

GB Wear a breathing mask!

mGB Warning! Danger to life, risk of injury or damage to the tool are possible

by ignoring!.

GB Protection class II

GB Wear ear-muffs!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach Di1050 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info