Bedienungsanleitung Scheppach Di1050 (Seite 15 von 56) (Deutsch, Englisch, Französisch, Polnisch)

782596

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58

GB І 15

Technical Data

Rated input voltage 220-230 V~ / 50 Hz

Idling speed n0

0-1000 min-1

0-2800 min-1

Power input (power con-

sumption) P 1050W

Blow count 0-16000 min-1

0-44800 min-1

Max. Drill size 13 mm

Max. drill diameter

in wood

in concrete

in steel

30 mm

20 mm

13 mm

Protection class II

Protection category IPX0

Weight 3,2 kg

Noise and vibration values

The total noise values determined in accordance

with EN 60745.

sound pressure level LpA 94 dB(A)

uncertainty KpA 3 dB

sound power level LWA 105 dB(A)

uncertainty KWA 3 dB

Wear hearing protection.

The effects of noise can cause a loss of hearing.

Total vibration values (vector sum - three directions)

determined in accordance with EN 60745.

Drilling in metal: 2,54 m/s2, K= 1,5 m/s2

Impact drilling in concrete: 9,0 m/s2, K= 1,5 m/s2

The specied vibration value was established in ac-

cordance with a standardized testing method. It may

change according to how the electric equipment is

used and may exceed the specied value in excep-

tional circumstances.

The specied vibration value can be used to compare

the equipment with other electric power tools.

The specied vibration value can be used for initial

assessment of a harmful effect.

Mounting

Pull out the power plug before carrying out any work

on the equipment. There is a risk of electrocution or

of injury from moving parts.

Mounting/pivoting the additional handle (Fig. 2/3)

Do not use the device without the additional handle. It

provides additional hold and reduces the risk of injury.

1. Release the lock for the additional handle (6).

2. Insert the additional handle (7) over the keyless

chuck (5) on to the device.

3. Pivot the additional handle (7) into the desired posi-

tion.

4. Retighten the lock for the additional handle (6).

Safety information for drilling machines

a) Wear ear protection during impact drilling. The

exposure to noise can cause hearing loss.

b) Use the additional handles delivered with the

device. The loss of control can result in injuries.

c) Hold the device by the insulated gripping sur-

faces when performing work in which the cut-

ting tool may come into contact with hidden

wiring or its own cord. Contact with a live wire

can also cause a charge in metal parts of the de-

vice and result in an electric shock.

d)Use suitable detectors in order to nd hidden

supply lines or ask the local utility company.

Contact with electrical cables can lead to elec-

tric shock and re, contact with a gas pipe can

result in an explosion. Damage to a water pipe

can lead to property damaged and electric shock.

e) Keep hands away from rotating parts. Wait un-

til the power tool has stopped before placing it

down. Risk of injury!

f) Avoid contact with the tool insert or the com-

ponent part immediately after processing. The

parts may be hot and cause burn injuries.

g) Immediately switch off the power tool if the tool

insert is blocked due to overloading or tilting of

the component part. The loss of control can result

in injuries.

h) Secure moving component part with clamping

devices. A hand held tool can slip and endanger

your safety.

i) The device must only be connected to a mains

socket via a residual-current circuit breaker (RCD)

with a rated leakage current of not more than 30

mA.

Residual risks

Even if you use this electric power tool in ac-

cordance with instructions, certain residual

risks cannot be rules out. The following hazards

may arise in connection with the equipment’s

construction and layout:

• Lung damage if no suitable protective dust mask

is used.

• Damage to hearing if no suitable ear protection

is used.

• Health damage caused by hand-arm vibrations if

the equipment is used over a prolonged period or

is not properly guided and maintained.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach Di1050 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info