Bedienungsanleitung Scheppach DM-ABS1200E - Dineiger (Seite 16 von 28) (Deutsch, Englisch)

782148

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

16 / 28

• Check the power cable regularly and have it repla-

ced by an authorized specialist at the rst sign of

any damage.

• Check your extension cables regularly and replace

them if damaged.

• When working outdoors, use only extension cables

that are approved for outdoor use and which are

marked accordingly.

• Concentrate on what you are doing. Use common

sense. Do not operate the tool if your mind is not

on your work.

• Never use an electric tool with a switch that cannot

be turned on and off. Warning! The use of plug-

in tools and accessories other than those intended

may put you at risk of injury.

• Always pull the plug out of the power socket before

adjusting or servicing the machine.

• Give these safety regulations to all persons who

work on the machine.

• Before you use the machine for the rst time, check

that the voltage marked on the rating plate is the

same as your mains voltage.

• If you need to use an extension cable, make sure

its conductor cross-section is big enough for the

equipments power consumption. Minimum cross-

section: 1.5 mm2.

• If you use a cable reel, the complete cable has to

be pulled off the reel. Check the power cable. Ne-

ver use a faulty or damaged power cable.

• Do not use the cable to pull the plug out of the so-

cket.

• Protect the cable from heat, oil and sharp edges.

• Do not leave the machine in the rain and never use

it in damp or wet conditions.

• Provide good lighting.

• Do not saw near ammable liquids or gases.

• Non-slip shoes are recommended when working

outdoors. Wear a hair net if you have long hair.

• Avoid abnormal working postures.

• Operators have to be at least 18 years of age. Trai-

nees of at least 16 years of age are allowed to use

the machine under supervision.

• Keep children away from the machine when it is

connected to the power supply.

• Keep your workplace clean of wood scrap and any

unnecessary objects. An untidy work area invites

accidents.

• Do not allow other persons, especially children, to

touch the tool or cable. Keep them out of your work

area.

• Persons working on the machine should not be dis-

tracted.

• Carry out conversions, adjustments, measure-

ments and cleaning jobs only when the motor is

switched off. - Pull out the power plug!

• Before switching on, make sure that all keys and wren-

ches have been removed from the tool.

• Switch off the motor and pull out the power plug before

you leave the workplace.

• Ret all guards and safety devices immediately after

you have completed any repairs or maintenance work.

ned only for removing saw dust (nor for normal dust).

• Regularly inspect the lter for damage.

• Replace damaged lters!

• Regularly check that the housing is well sealed and

regularly inspect the lter and saw dust sackseals.

• Do not allow foreign objects such as screws, nails,

plastic or wood chips to enter the cleaning nozzle.

• The machine must only be used with original parts

and orginal accessories supplies by the manufac-

turer.

• The Exhaust System is constructed exclusively for

exhaust-vacuuming wood chips and saw dust and

may only be used in connection with wood proces-

sing machines.

• When vacuuming shop oors, wood or metal pie-

ces may not be vacuumed.

• Any other use exceeds authorization. The manu-

facturer is not responsible for any damagesresul-

ting from unauthorized use; risk is the sole respon-

sibility of the operator.

• The safety, work and maintenance instructions

of the manufacturer as well as the technical data

given in the calibrations and dimensions must be

adhered to.

• Relevant accident prevention regulations and

other, generally recognized safety-technical rules

must also be adhered to.

• The machine may only be used, maintained, and

operated by persons familiar with and instructed in

its operating and procedures. Arbitrary alterations

to the machine release the manufacturer from all

responsibiliy for any resulting damages.

• The machine may only be used with original acces-

sories made by the manufacturer.

Please note that our equipment has not been desig-

ned for use in commercial, trade or industrial appli-

cations. Our warranty will be voided if the equipment

is used in commercial, trade or industrial businesses

or for equivalent purposes.

5. Safety information

Attention! The following basic safety measures must

be observed when using electric tools for protection

against electric shock, and the risk of injury and re.

Read all these notices before using the electric tool

and keep the safety instructions for later reference.

Safety information

• Warning: When using electric tools it is imperative

to take the following basic safety precautions in or-

der to reduce the risk of electric shock, injury and

re.

• Take due note of all this information before and

while working with the machine.

• Do not lose these safety regulations.

• Guard against electric shock Avoid body contact

with earthed parts.

• When equipment is not being used it should be kept

in a dry, closed place out of childrens reach.

• Keep mounted attachments sharp and clean to

enable you to work well and safely.

Scheppach DM-ABS1200E - Dineiger Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info