Bedienungsanleitung Scheppach DS1200 Primaster (Seite 18 von 36) (Deutsch, Englisch, Französisch)

782196

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

8 Wear suitable clothing

–Do not wear wide clothing or jewellery, which

can become entangled in moving parts.

–When working outdoors, anti-slip footwear is

recommended.

–Tie long hair back in a hair net.

9 Use protective equipment

–Wear protective goggles.

–Wear a mask when carrying out dust-creating

work.

10 Connect the dust extraction device

–If connections for dust extraction and a collect-

ing device are present, make sure that they are

connected and used properly.

–Operation in enclosed areas is only permitted

with a suitable extraction system.

11 Do not use the cable for purposes for which it is

not intended

–Do not use the cable to pull the plug out of

the outlet. Protect the cable from heat, oil and

sharp edges.

12 Secure the workpiece

–Use the clamping devices or a vice to hold the

workpiece in place. In this manner, it is held

more securely than with your hand.

–An additional support is necessary for long

workpieces (table, trestle, etc.) in order to pre-

vent the machine from tipping over.

–Always press the workpiece rmly against

the working plate and stop in order to prevent

bouncing and twisting of the workpiece.

13 Avoid abnormal posture

–Make sure that you have secure footing and

always maintain your balance.

–Avoid awkward hand positions in which a sud-

den slip could cause one or both hands to come

into contact with the saw blade.

14 Take care of your tools

–Keep cutting tools sharp and clean in order to

be able to work better and more safely.

–Follow the instructions for lubrication and for

tool replacement.

–Check the connection cable of the electric tool

regularly and have it replaced by a recognised

specialist when damaged.

–Check extension cables regularly and replace

them when damaged.

–Keep the handle dry, clean and free of oil and

grease.

15 Pull the plug out of the outlet

–Never remove loose splinters, chips or jammed

wood pieces from the running saw blade.

–During non-use of the electric tool or prior to

maintenance and when replacing tools such as

saw blades, bits, milling heads.

16 Do not leave a tool key inserted

–Before switching on, make sure that keys and

adjusting tools are removed.

17 Avoid inadvertent starting

–Make sure that the switch is switched off when

plugging the plug into an outlet.

• Relevant accident prevention regulations and oth-

er, gene rally recognized safety-technical rules

must also be adhered to.

• The machine may only be used, maintained, and

operated by persons familiar with it and instructed

in its operation and procedures. Arbitrary altera-

tions to the machine release the manufacturer from

all responsibility for any resulting damages.

• The machine may only be used with original ac-

cessories and tools made by the manufacturer.

• Any other use exceeds authorization. The manu-

facturer is not responsible for any damages result-

ing from un authorized use; risk is the sole respon-

sibility of the operator.

Please note that our equipment has not been de-

signed for use in commercial, trade or industri-

al applications. Our warranty will be voided if the

equipment is used in commercial, trade or industrial

businesses or for equivalent purposes.

5. Safety information

Attention! The following basic safety measures must

be observed when using electric tools for protection

against electric shock, and the risk of injury and re.

Read all these notices before using the electric tool

and keep the safety instructions for later reference.

Safe work

1 Keep the work area orderly

–Disorder in the work area can lead to accidents.

2 Take environmental inuences into account

–Do not expose electric tools to rain.

–Do not use electric tools in a damp or wet en-

vironment.

–Make sure that the work area is well-illuminated.

–Do not use electric tools where there is a risk of

re or explosion.

3 Protect yourself from electric shock

–Avoid physical contact with earthed parts (e.g.

pipes, radiators, electric ranges, cooling units).

4 Keep children away

–Do not allow other persons to touch the equip-

ment or cable, keep them away from your work

area.

5 Securely store unused electric tools

–Unused electric tools should be stored in a dry,

elevated or closed location out of the reach of

children.

6 Do not overload your electric tool

–They work better and more safely in the speci-

ed output range.

7 Use the correct electric tool

–Do not use low-output electric tools for heavy

work.

–Do not use the electric tool for purposes for

which it is not intended. For example, do not

use handheld circular saws for the cutting of

branches or logs.

–Do not use the electric tool to cut rewood.

18 / 36

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach DS1200 Primaster Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info