Bedienungsanleitung Scheppach DTB250-20ProS (Seite 19 von 108) (Deutsch, Englisch, Französisch, Polnisch)

782592

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

GB | 19

gripping surfaces. Contact with a live power line

can also electrify metal device parts and lead to

an electric shock.

2. Safety instructions when using a long drill

a. Never work at a speed that is higher than the

maximum permissible speed for the drill. With

higher speeds, the drill can easily twist if it is able

to turn freely without contact with the workpiece,

and cause injuries.

b. Always start drilling at a lower speed and

once contact has been established between

the drill and the workpiece. With higher speeds,

the drill can easily twist if it is able to turn freely

without contact with the workpiece, and cause in-

juries.

c. Never apply excessive pressure and only in

the longitudinal direction to the drill. Drills can

twist and this can cause the drill to break, or lead

to a loss of control and to injuries.

Safety advice relating to cordless drill drivers

• Hold the device by the insulated handle surfaces

when you are undertaking work where there is

the danger of the screw striking hidden electricity

cables or the device’s mains lead. Contact of the

screw with a live wire could cause metal parts of the

device to become live and lead to electric shock.

• Children or persons who lack the knowledge or

experience to use the device or whose physical,

sensory or intellectual capacities are limited must

never be allowed to use the device without supervi-

sion or instruction by a person responsible for their

safety. Children must never be allowed to play with

the device.

• Securely support the workpiece. A workpiece held

in a clamp or vice is kept more securely in place

than one held by your hand.

POISONOUS DUSTS!

Harmful / noxious dusts generated from your work

represent a risk to the health of the person operating

the device and to anyone near the work area. Wear

safety glasses and a dust mask! Do not drill any ma-

terial containing asbestos. Asbestos is a known car-

cinogen.

Hold the electrical power tool rmly. High reaction

torques may occur momentarily during tightening or

loosening of screws.

If the inserted tool jams, switch off the electrical pow-

er tool immediately. Be prepared for high reaction tor-

ques as they may cause kickback. The inserted tool

may jam if the electrical power tool is overloaded or is

held at an angle to the workpiece.

b. Do not use an electrical power tool if its switch

is defective. An electrical power tool that can no

longer be switched on and off is dangerous and

must be repaired.

c. Pull the mains plug from the socket before you

make any adjustments to the device, change

accessories or when the device is put away.

This precaution is intended to prevent you from

unintentionall starting the device.

d. When not in use always ensure that electrical

power tools are kept out of reach of children.

Do not let anyone use the device if he or she

is not familiar with it or has not read the in-

structions and advice. Electrical power tools

are dangerous when they are used by inexperi-

enced people.

e. Look after the device carefully. Check that

moving parts are working properly and move

freely. Check for any parts that are broken

or damaged enough to detrimentally affect

the functioning of the device. Have damaged

parts repaired before you use the device.

Many accidents have their origins in poorly main-

tained electrical power tools.

f. Keep cutting tools clean and sharp. Carefully

maintained cutting tools with sharp cutting edges

are less likely to jam and are easier to control.

g. Use the electrical power tool, accessories,

inserted tools etc. in accordance with these

instructions and advice, and the stipulations

drawn up for this particular type of device. In

doing this, take into account the working con-

ditions and the task in hand. The use of elec-

trical power tools for purposes other than those

intended can lead to dangerous situations.

h. Keep handles and grasping surfaces dry,

clean and free from oil and grease. Slippery

handles and grasping surfaces do not allow for

safe handling and control of the power tool in un-

expected situations.

5) Service

a. Have your power tool repaired by qualied

specialists only, and always use original

spare parts for repair. This is to maintain the

safety of the power tool.

6. Additional Safety Warnings

Safety instructions for drills

1) Safety instructions for all work

a. Wear hearing protection when hammer-drill-

ing. Excessive noise can result in a loss of hearing.

b. When performing work during which the tool

attachment or the screws can meet with con-

cealed power lines or its own connection

cable, hold the electric tool by the insulated

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach DTB250-20ProS Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info