Bedienungsanleitung Scheppach DTB250-20ProS (Seite 21 von 108) (Deutsch, Englisch, Französisch, Polnisch)

782592

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

GB | 21

Noise output in dB

Sound power level LWA 79 dB(A) (EN ISO 3744)

Sound pressure level LpA 68 dB(A) (EN ISO 11201)

Uncertainty Kwa/pA 5 dB(A)

Vibration value

Vibration ah 9,925 m/s²)

Uncertainty Kh 1,5 m/s²

9. Unpacking

• Open the packaging and remove the device carefully.

• Remove the packaging material as well as the

packaging and transport bracing (if available).

• Check that the delivery is complete.

• Check the device and accessory parts for transport

damage. Inform the transport agent immediately of

any faults. Later complaints cannot be considered.

• If possible, store the packaging until the warranty

period has expired.

• Familiarize yourself with the machine with the help

of the operating instructions manual before using it.

• Use only original parts for accessories as well as

consumables and spare parts. Spare parts can be

obtained from your scheppach retailer.

• Please quote our article numbers as well as type

and production year in all your orders.

m ATTENTION!

The device and packaging materials are not toys!

Children must not be allowed to play with plas-

tic bags, lm and small parts! There is a risk of

swallowing and suffocation!

10. Construction

Warning!

Always remove the battery pack before making ad-

justments to the equipment.

11. Installation

m Important!

You must fully assemble the appliance before using it

for the rst time!

To ensure that the Li battery pack provides long ser-

vice you should take care to recharge it promptly. You

must recharge the battery pack when you notice that

the power of the cordless equipment drops.

Insertion / removal of a batterypack into the ap-

pliance

Ensure that the appliance is switched off before in-

serting the battery. The insertion of a battery into an

electrical appliance that is switched on can lead to

accidents.

Inserting the rechargeable battery pack:

Move the rotation switch (2) into the middle position

(lock) and push the rechargeable battery pack (5) into

the handle until it engages.

Removing the rechargeable battery pack:

Press the release button (6) and remove the re-

chargeable battery pack.

Used batteries

If a fully recharged battery lasts for considerably

shorter operating times, the battery is used up and

needs to be replaced. Only use an OEM battery pack

replacement available from our Customer Service.

Changing tools

• Your cordless electric drill / screwdriver has a fully

automatic spindle lock and is tted with an enclosed

keyless chuck incorporating the latest technology.

Once the motor has come to a halt, the drive shaft

is automatically locked, so that the chuck (9) can be

opened simply by turning it . After you have insert-

ed the required bit and xed it in place by turning

the chuck , you can immediately continue working.

The spindle lock releases itself automatically when

the motor is started (by operation of the ON / OFF

switch (3) ).

Torque pre-selection

• You can adjust the torque by using (8) torque prese-

lection.

• Select a low setting for small screws, soft workma-

terial.

• Select a high setting for large screws, hard work

materials and for the extraction of screws.

• For drilling, push the selector to the setting for drill-

ing, in that you adjust the torque pre-selector to the

position .

• For drilling tasks, also push the gear selector switch

(1) to the front (Position: 2).

2 Gear Drive

CAUTION! Move the gear selector switch (1) only af-

ter the device has come to a standstill. Failure to ob-

serve this advice may result in damage to the device.

In the rst gear (Gear selector switch (1) in Position:

1) This setting is intended for use with all screwing

tasks and for accessories (see example Fig. B).

In the second gear (Gear selector switch (1) in Posi-

tion: 2) for the carrying out of drilling tasks (see ex-

ample Fig. A).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach DTB250-20ProS Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info