Bedienungsanleitung Scheppach FS850 (Seite 21 von 92) (Deutsch, Englisch, Französisch, Polnisch)

781905

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

GB | 21

Note: The handle with 2 cross-recess screws

(B) on the motor casing. (Fig. 4)

5 Place the tub (4) in the base frame (2).

6 Place the cooling water pump (14) in the tub (4).

7 Fill water till the pump (14) is lled completely

with water. (Fig. 4)

8 Pull out the pin of the transport lock (13). (Fig.5)

7. Safety information

Working with the tile-cutting machine can be risky, if

safe and correct work procedures are not followed.

Not observing the customary safety measures can

lead to physical injuries to the operators. Safety

equipment such as protective goggles, dust masks

and ear protection can reduce the risks of possible

injury. Even the best possible protection however,

cannot match incorrect assessment, carelessness or

negligence. Always use your healthy common sense

and caution in the workshop. If you feel an operation

is risky, do not try it out. Think about an alternative

method which feels safer. Think of the following: Your

physical integrity is your personal responsibility. This

machine was designed to perform certain jobs.

We recommend urgently that the machine should not

be altered and it should not be used for application

areas for which it was not designed. If you are not

sure, please ask your dealer before working with the

product.

Warning: Non-observation of these specications

can lead to serious injuries.

1. Keep work area clean Cluttered areas and bench-

es invite injuries.

2. Consider work area environment Don‘t expose pow-

er tools to rain. Don‘t use power tools in damp or wet

locations. Keep work area well lit. Don‘t use power

tools in presence of ammable liquids or gases.

3. Guard against electric shock Prevent body con-

tact with grounded surfaces (e.g. pipes, radiators,

ranges refrigerators).

4. Keep children away Do not let visitors contact tool

or extension cord. All visitors should be kept away

from work area.

5. Store idle tools When not is use, tools should be

stored in dry, high, or locked-up place, out of the

reach of children.

6. Don‘t force tool It will do the job better and safer at

the rate for which it was intended.

7. Use right tool Don‘t force small tools or attach-

ments to do the job of heavy duty tool. Don‘t use

tools for purposes not intended: for example, don‘t

use circular saw for cutting tree limbs or logs.

8. Dress properly Do not wear loose clothing or jew-

ellery. They can be caught in moving parts. Rub-

ber gloves and nonskid footwear are recommend-

ed when working outdoors. Wear protective hair

covering to contain long hair.

Noise output in dB

Sound power level of LWA = 108/111 dB (A) uncertain-

ly 3 dB (A)

Noise pressure level LPA = 95/98 dB (A) uncertainly 3

dB (A) according to DIN EN ISO 3744; EN ISO 11201

4. Delivery scope

• Translation from the original instruction manual

• Tile-cutter

• Cooling water pump

• Angle stop

• Table extension

• 4 legs

• Handle

• Tub

• 14 mm wrench

• Counter torque wrench

5. Attachment

• Open the packaging and remove the device care-

fully.

• Remove the packaging material as well as the

packaging and transport bracing (if available).

• Check that the delivery is complete.

• Check the device and accessory parts for trans-

port damage.

• If possible, store the packaging until the warranty

period has expired.

• Familiarize yourself with the machine with the help

of the operating instructions manual before using

it.

• Use only original parts for accessories as well as

consumables and spare parts. Spare parts can be

obtained from your scheppach retailer.

• Please quote our article numbers as well as type

and production year in all your orders.

m ATTENTION

The device and packaging materials are not toys!

Children must not be allowed to play with plastic

bags, lm and small parts! There is a risk of swal-

lowing and su󰀨ocation!

6. Construction

Fig.3-5

For packaging purposes, your machine is not fully

assembled.

1 Remove the machine from the packaging and

place carefully to one side on the ground.

2 Introduce the legs (3) into the base frame and lock

them with buttery nuts (A). (Fig. 3)

3 Set the machine on its legs.

4 Install the handle with 2 cross-recess

screws (B) on the motor casing. (Fig. 4)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach FS850 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info