Bedienungsanleitung Scheppach FS850 (Seite 23 von 92) (Deutsch, Englisch, Französisch, Polnisch)

781905

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

GB | 23

9. Proper use

The machine corresponds to the valid EU Ma-

chine Directive

• Before starting work, all the protection- and safety

devices must be installed on the machine.

• The machine is designed for operation by one per-

son. The operator will be responsible for the pres-

ence of third persons in the work area.

• Observe all safety- and danger instructions on the

machine.

• Keep all safety and danger instructions near the

machine in complete and readable form.

• The machine is designed exclusively for cutting

small and medium-sized tiles (glazed, ceramic or

similar tiles) with the o󰀨ered tool and accessories.

Cutting of metal and wood is not allowed.

• The dimensions of the workpieces to be machined

should not exceed or fall below the specied max-

imum and minimum dimensions.

• Please use the machine only if it is in a technically

fault-free condition. Use It properly, conscious of

the involved safety and risk factors and giving due

consideration to the operating instructions manual!

Faults, especially those that can a󰀨ect safety must

be rectied immediately!

• The safety-, workplace- and maintenance spec-

ications of the manufacturer as well as the di-

mensions specied in the technical data must be

observed.

• The applicable accident prevention measures and

the other generally recognized technical safety

rules must be observed.

• The machine must be used, serviced or repaired

only by persons who are familiar with it and who

have been briefed about its risks.

Arbitrary alterations to the machine will make the

liability of the manufacturer for damages resulting

there from null and void.

• The machine may be used only with original ac-

cessories and original tools of the manufacturer.

Residual risks

Despite proper use, certain residual risk factors

cannot be eliminated fully. The following things can

occur, depending on the design and structure of the

machine:

• Intervention in the running diamond cutting disc.

• Contact with the diamond cutting disc in exposed

area.

• Ejection of work pieces and work piece compo-

nents.

• Ejection of a faulty diamond attachment in the cut-

ting disc.

• Hearing damage due to non-use of the required

hearing protection.

• Injuries to the eyes due to non-use of eye pro-

tection

ADDITIONAL INSTRUCTIONS

FOR LEAKAGE CURRENT CIRCUIT-BREAKER.

Please observe the following important instructions

on start-up and handling.

Pay attention to the instructions even if you hand

over the product to a third party. Preserve this oper-

ating Instructions manual for subsequent reference.

SAFETY INSTRUCTIONS!

• Arbitrary alteration and/or modication of the prod-

uct is not allowed for safety- and approval reasons

(CE). Never dismantle the product.

• The product is not suitable for handling by children.

Children cannot assess the risks involved in han-

dling electrical devices. Therefore, pay special at-

tention to the presence of children.

• The structure of the product corresponds to Pro-

tection Class 1. Only a proper mains socket with an

earth wire (230V~/50Hz) of the public power sup-

ply should be used.

• In industrial equipment, the Accident Prevention

Specications of the Federation of Trade Associ-

ations for Electrical Systems and Resources must

be observed.

• In schools, training centres, hobby- and self-help

workshops, the operation of the product must be

monitored responsibly by trained sta󰀨.

• Handle the product carefully. Impacts, hits and

drops from even low heights can damage the ma-

chine.

• Never use the product if it is brought from a cold to

a hot room. Under certain circumstances, the re-

sulting condensed water can destroy the product.

• Let the product come to the room temperature, be-

fore connecting it to the mains power supply. Under

certain circumstances, this can take several hours.

• Do not hold the product with moist or wet hands.

• Ensure that the Insulation of the entire product is

neither damaged nor destroyed.

• If the product is not operated over long periods,

disconnect it from the mains power supply, pull the

plug out of the socket.

• Avoid the following environmental conditions at the

installation site or during transport.

• Wetness or very high humidity. Extreme cold. Dust

or combustible gases, vapours or solvents. Strong

vibrations.

• Strong magnetic elds as in the vicinity of ma-

chines or loudspeakers.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach FS850 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info