Bedienungsanleitung Scheppach HD15 (Seite 20 von 120) (Alle Sprachen)

781454

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

20 / 120

11. Electrical connection

Connection and repair work on the electrical equip-

ment must be carried out by a qualied technician

only.

The installed electric motor is factory connected ready

for operation.

The connection made by the customer as well as any

extension cables used must comply with all relevant

regula tions.

Importand note

Defective electrical connection cables

If the power cable is damaged, it must be replaced by

the manufacturer, its customer service or a similarly

qualied person to avoid hazards.

Electrical connection cables often suffer isolation

damage.

Possible causes are:

• Pinch points when connection cables are run

throught window or door gabs.

• Kinks resulting from incorrect attachment of laying

of the connection cable.

• Cuts resulting from running over the connection ca-

ble.

• Isolation damage resulting from forcefully pulling

out of the wall socket.

Such defective electrical connection cables must

not be used as the isolation damage makes them

extremly hazardous.

Check electrical connection cables regularly for dam-

age. Make sure the cable is disconnected from the

mains when checking.

Electrical connection cables must comply with the

regulations applicable in your country.

One phase motor

• The mains voltage must comply with the specica-

tion on the motor name plate.

• Extension cables must have a cross section of at

least 1.0 sqmm.

• The mains is protected by a 16 A slowblow fuse.

When making inquiries please specify the following:

• Motor manufacturer

• Motor current type

• Motor nameplate specications

• Switch nameplate specications

When sending the motor in, always send the complete

drive unit including the switch.

12. Disposal and recycling

The equipment is supplied in packaging to prevent

it from being damaged in transit. The raw materials

in this packaging can be reused or recycled. Never

place batteries in your household refuse, in re or

in water. Batteries should be collected, recycled or

disposed of by environment-friendly means. The

equipment and its accessories are made of various

types of material, such as metal and plastic. Defec-

tive components must be disposed of as special

waste. Ask your dealer or your local council.

• Attach the shavings bag to the lower air ventilator

using the clamp. Fig. 14

• Attach the exhaust hose to the nozzle on the hous-

ing and afx it with a hose clamp. Fig. 15

• Attach the hose coupling to the other end of the

hose using a hose clamp. Fig. 16

The exhaust system should be cleaned every time the

shavings bag is changed.

Damaged lters and bags must be immediately

changed in order to keep the amount of dust that es-

capes into the work environment as low as possible.

8. Initial operation

Note safety instructions before operation. The data

on the motor type plate (voltage and frequency) must

conform to the mains supply voltage and frequency.

After connection to the mains, the Dust Extractor is

ready for operation.

9. Maintenance

For all maintenance and cleaning tasks, tum off

motor and unplug mains.

• Connection and repair work on the electrical instal-

lation may be carried out by a qualied electrician

only.

• For constant performance, periodi cally shake out l-

ter bag vigorously. Between cleanings, beating the

bag with the hand several times is sufcient.

• The sawdust bag must be replaced a1 the latest

when the sawdust is within 10 cm. of the housing

collar.

Special accessories

Filter bag U/S/G Part no. 7906300701

Filter catridge U/S/G Part no. 7906300702

Service information

With this product, it is necessary to note that the fol-

lowing parts are subject to natural or usage-related

wear, or that the following parts are required as con-

sumables.

Wearing parts: Filter bag, chippings bag

* may not be included in the scope of supply!

10. Storage

Store the device and its accessories in a dark, dry

and frost-proof place that is inaccessible to children.

The optimum storage temperature is between 5 and

30˚C. Store the electrical tool in its original packaging.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach HD15 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info