Bedienungsanleitung Scheppach HG34 (Seite 21 von 124) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Polnisch, Schwedisch, Norwegisch)

781661

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

21GB

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

7. Before putting the machine into

operation

Before you connect the equipment to the mains

supply make sure that the data on the rating plate

are identical to the mains data.

Always pull the power plug before making

adjustments to the equipment.

Pull the power plug before doing any maintenance

or assembly work on the equipment.

• The machine must be set up so that it stands rmly,

i.e. it must be securely screwed to a work bench or

similar.

• All covers and safety devices have to be properly t-

ted before the equipment is switched on.

• The grinding and polishing wheel must rotat freely.

• Check that the voltage on the rating plate is the

same as your supply voltage before you connect the

equi ment to the power supply.

7.1 Fitting the spark re ector (Fig. 2-4 / Item 3)

Fit the spark re ector (3) to the double wheel grinder

using the adjusting screw (10).

7.2 Adjusting the spark re ector (Fig. 5 / Item 3)

• Adjust the spark deector (3) using the adjusting

screw (10) so that the distance between the dry

grinding wheel (5) and the spark deector (3) is as

small as possible and certainly does not exceed 2

mm.

• Adjust the spark deector (3) periodically to com-

pensate for wear on the wheel.

7.3 Fitting the workpiece supports (Fig. 6 / Item 8)

Secure the workpiece supports (8) to the double wheel

grinder using the star screw (7).

7.4 Adjusting the workpiece supports (Fig. 7 / Item 8)

• Adjust the workpiece supports (8) using the star

screws (7) so that the distance between the dry

grinding wheel (5) and the workpiece support (8) is

as small as possible and certainly does not exceed

2 mm. • Adjust the workpiece supports (8) periodi-

cally to compensate for wear on the dry grinding

wheel (5).

7.5. Changing the wheels (Fig. 8-9)

• Remove the 3 screws (A) holding the side section

of the safety hood (B) and remove the safety hood.

Slacken the nut (D) (Important: The grinding wheel

on the left is fastened with a lefthanded thread and

the grinding wheel on the right with a right-handed

thread) by holding the nut of the grinding wheel

mount on the opposite side.

• Then remove the  ange (C) and replace the grind-

ing wheel (5). To assemble, proceed in the reverse

order. The grinding wheel is mounted with the help

of a rag. Mount the  ange (C) and the nut (D) on

the shaft and hold steady with the help of a rag

when you tighten the nut (D).

6. TECHNICAL DATA

HG34

Mains voltage 230 V ~ 50 Hz

Power rating 120 W

Idle speed n00-9900 min-1

Grinding wheel

diameter 75 mm

Polishing wheel

diameter 75 mm

Wheel thickness 20 mm

Wheel hole diameter 10 mm

Max. peripheral

speed 50 m/s

Protection class II

Weight 3.1 kg

Sound and vibration

Sound and vibration values were measured in

accordance with EN 61029.

LpA sound pressure level ..................... 75,8 dB(A)

KpA uncertainty .............................................3 dB

LWA sound power level ....................... 88,7 dB(A)

KWA uncertainty .............................................3 dB

Wear ear-muffs.

The impact of noise can cause damage to hearing.

Total vibration values (vector sum of three directions)

determined in accordance with EN 61029.

Vibration emission value ah ≤ 2.5 m/s2

K uncertainty = 1.5 m/s2

Warning!

The speci ed vibration value was established in ac-

cordance with a standardized testing method. It may

change according to how the electric equipment is

used and may exceed the speci ed value in excep-

tional circumstances.

The specied vibration value can be used to compare

the equipment with other electric powertools.

The specied vibration value can be used for initial

assessment of a harmful effect.

Keep the noise emissions and vibrations to a

minimum.

• Only use appliances which are in perfect working-

order.

• Service and clean the appliance regularly.

• Adapt your working style to suit the appliance.

• Do not overload the appliance.

• Have the appliance serviced whenever necessary.

• Switch the appliance off when it is not in use.

• Wear protective gloves.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach HG34 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info