Bedienungsanleitung Scheppach HL1300 (Seite 26 von 144) (Deutsch, Englisch, Französisch, Italienisch, Polnisch)

781954

Zoom out

Zoom in

Vorherige Seite

1/144

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

26 | GB

• Afterwards, close the oil drain plug again.

• Remove the ventilation cap, pour in 9 litres of fresh

hydraulic oil using a clean funnel.

• Replace the ventilation cap (12).

Warning! Ensure that no debris gets into the oil

container.

Dispose of the used oil in a correct manner at a

public collection facility. It is prohibited to drop

old oil on the ground or to mix it with waste.

We recommend oil from the HLP 32 range.

Hydraulic system

The hydraulic unit is a closed system with oil tank, oil

pump and control valve.

The system is complete when the machine is deliv-

ered, and may not be changed or manipulated.

Connections and repairs

Connections and repairs of electrical equipment may

only be carried out by an electrician.

Please provide the following information in the event

of any enquiries:

• Type of current for the motor

• Machine data - type plate

Service information

Please note that the following parts of this product

are subject to normal or natural wear and that the fol-

lowing parts are therefore also required for use as

consumables.

Wear parts*: hydraulic oil, splitting wedge, Transmis-

sion oil

* Not necessarily included in the scope of delivery!

16. Disposal and recycling

The equipment is supplied in packaging to prevent it

from being damaged in transit. The raw materials in

this packaging can be reused or recycled. The equip-

ment and its accessories are made of various types

of material, such as metal and plastic. Defective

components must be disposed of as special waste.

Ask your dealer or your local council.

When connecting to the mains or relocating the ma-

chine, check the direction of rotation (swap polarity in

the wall socket if necessary). Turn pole inverter in the

machine socket.

12. Cleaning

Attention!

Pull out the power plug before carrying out any clean-

ing work on the equipment.

We recommend that you clean the equipment imme-

diately after you use it.

Clean the equipment regularly with a damp cloth and

some soft soap. Do not use cleaning agents or sol-

vents; these may be aggressive to the plastic parts in

the equipment. Ensure that no water can get into the

interior of the equipment.

13. Transport

Before transporting the kindling splitter, ensure it is

in the transport position. To do this, lower the riving

knife until it rests on the metal support. Next, remove

both shafts and allow the cylinder to move down-

wards nally. You can set the splitter onto a palette

with the help of a crane, but never lift the splitter by

the splitting blade. The top part of the splitter features

an eyelet, where the crane hook may be engaged.

14. Storage

Store the device and its accessories in a dark, dry

and frost-proof place that is inaccessible to children.

The optimum storage temperature is between 5 and

30˚C.

Cover the electrical tool in order to protect it from

dust and moisture.

Store the operating manual with the electrical tool.

15. Maintenance

Attention!

Pull out the power plug before carrying out any main-

tenance work on the equipment. Make sure that the

drive shaft is not connected to the traction unit.

When must the oil be changed?

First oil change after 50 operating hours, then every

250 operating hours.

Replacing the oil (g. 9 + 10)

• Completely retract the splitting knife.

• Put a container with a volume of at least 10 litres

under the splitter.

• Loosen the ventilation cap (12).

• Open the oil drain plug under the oil tank so the oil

can ow out.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach HL1300 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info