Bedienungsanleitung Scheppach HL1450 (Seite 24 von 124) (Deutsch, Englisch, Französisch, Italienisch)

781855

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

24 | GB

Oil change

Position the kindling splitter on a slightly raised sur-

face (e.g. euro pallet). Place a sufciently large con-

tainer (at least 15 litres) under the drain plug on the

splitting column. Open the drain plug and carefully let

the oil run into the container.

Open the lling screw on the top of the split-

ting column so the oil can drain more easily. Re-

place the drain plug and its seal and tighten it.

Top up with new hydraulic oil. (Content: see technical

data) and check the oil level with the sight glasses

(13 + 13a). After changing the oil, operate the kindling

splitter a few times without actually splitting.

m WARNING!

Ensure that no debris gets into the oil container.

Dispose of the used oil in a correct manner at a

public collection facility. It is prohibited to drop

old oil on the ground or to mix it with waste.

We recommend oil from the HLP 32 range.

Hydraulic system

The hydraulic unit is a closed system with oil tank, oil

pump and control valve.

The system is complete when the machine is deliv-

ered, and may not be changed or manipulated.

Connections and repairs

Connections and repairs of electrical equipment may

only be carried out by an electrician.

Please provide the following information in the event

of any enquiries:

• Type of current for the motor

• Machine data - type plate

Service information

Please note that the following parts of this product

are subject to normal or natural wear and that the fol-

lowing parts are therefore also required for use as

consumables.

Wear parts*: hydraulic oil, splitting wedge, Transmis-

sion oil

* Not necessarily included in the scope of delivery!

16. Disposal and recycling

The equipment is supplied in packaging to prevent it

from being damaged in transit. The raw materials in

this packaging can be reused or recycled. The equip-

ment and its accessories are made of various types

of material, such as metal and plastic.

Defective components must be disposed of as spe-

cial waste. Ask your dealer or your local council.

Three-phase motor 400 V / 50 Hz

Mains voltage 400 V / 50 Hz

Mains voltage and extension cables must be 5-lead

(3P + N + SL (3/N/PE). Extension cables must have

a minimum cross-section of 1.5 mm². Mains fuse pro-

tection is 16 A maximum.

When connecting to the mains or relocating the ma-

chine, check the direction of rotation (swap polarity in

the wall socket if necessary). Turn pole inverter in the

machine socket.

12. Cleaning

m ATTENTION!

Pull out the power plug before carrying out any clean-

ing work on the equipment.

We recommend that you clean the equipment imme-

diately after you use it.

Clean the equipment regularly with a damp cloth and

some soft soap. Do not use cleaning agents or sol-

vents; these may be aggressive to the plastic parts in

the equipment. Ensure that no water can get into the

interior of the equipment.

13. Transport

Before transporting the kindling splitter, ensure it is

in the transport position. To do this, lower the riving

knife until it rests on the metal support. Next, remove

both shafts and allow the cylinder to move down-

wards nally. You can set the splitter onto a palette

with the help of a crane, but never lift the splitter by

the splitting blade. The top part of the splitter features

an eyelet, where the crane hook may be engaged.

14. Storage

Store the device and its accessories in a dark, dry

and frost-proof place that is inaccessible to children.

The optimum storage temperature is between 5 and

30˚C.

Cover the electrical tool in order to protect it from

dust and moisture.

Store the operating manual with the electrical tool.

15. Maintenance

m ATTENTION!

Pull out the power plug before carrying out any main-

tenance work on the equipment. Make sure that the

drive shaft is not connected to the traction unit.

When must the oil be changed?

First oil change after 50 operating hours, then every

250 operating hours.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach HL1450 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info