Bedienungsanleitung Scheppach HL1600 (Seite 23 von 112) (Deutsch, Englisch, Französisch, Italienisch)

781856

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

GB | 23

Specify our part numbers as well as the type and year

of construction of the device in your orders.

m ATTENTION

The device and packaging materials are not toys!

Children must not be allowed to play with plas-

tic bags, lm and small parts! There is a risk of

swallowing and suffocation!

9. Attachment / Before starting the

equipment

9.1 Attaching the wheel axle (enclosed accessories

bag a) (g. 3)

Mount the wheel axle on the designated spot at the

lower rear end of the splitter and use two brackets and

nuts to tighten it.

9.2 Attaching the wheels (enclosed accessories

bag b) (g. 4)

First, place a washer on each side of the wheel axle,

then attach the wheels and secure them with another

washer and a cotter pin.

9.3 Putting the splitter into the work position

(enclosed accessories bag c) (Fig. 5 + 6)

Connect the splitter to the mains power. Be aware of

the motor’s direction of rotation. Lower both control

handles until the cylinder engages with the guide.

Insert the two L-pins (C) to secure the cylinder on

the kindling splitter. Secure the L-pins in the spring

tabs. Then bring the splitting blade to the top position

and remove the support. You must store the support

safely because it is needed every time the splitter is

transported.

9.4 Attaching the supporting arm (12)

(enclosed accessories bag d) (Fig. 7)

Secure the supporting arm with a hexagon bolt

M10x40, two washers and a nut.

9.5 Attaching the hook (D)

(enclosed accessories bag e) (Fig. 8)

Attach the hook on the frame with 2 hexagon bolts

and 2 nuts.

9.6 Attaching the log lifter

(enclosed accessories bag f) (Fig. 9)

Attach the log lifter on the xing bracket with 1 hexa-

gon bolt M16x100.

Hook the chain onto the splitting blade.

9.7 Attaching the additional wheel (Fig. 12)

Mount the transport wheel as shown in Fig. 12. Use

the locking pin to attach the wheel either to the upper

or the lower hole.

• Even when all safety measures are taken, some re-

maining hazards which are not yet evident may still

be present.

• Remaining hazards can be minimized by following

the safety instructions as well as the instructions in

the chapter Authorized use and in the entire operat-

ing manual.

• Health hazard due to electrical power, with the use

of improper electrical connection cables.

• Release the handle button and switch off the ma-

chine prior to any operations.

• Avoid accidental starts of the machine: Do not

press the start button while inserting the plug into

the socket.

• Use the tools recommended in this manual to ob-

tain the best results from your machine.

• Always keep hands away from the work area when

the machine is running.

7. Technical data

HL1600

Motor V/Hz 400V / 50Hz

Input P1 W 4500

Output P2 W 3500

Operating mode S6 40%

Motor speed 1/min 1400

Phase inverter yes

Dimensions D/W/H 1150 x 1050 x 2500 mm

Log length 1100 mm

Power max. tons* 16

Piston stroke 948 mm

Forward speed cm/s 14,2

Return speed cm/s 6,4

Oil quantity l 18

Weight kg 256

Subject to technical changes!

8. Unpacking

Open the packaging and remove the device carefully.

Remove the packaging material as well as the pack-

aging and transport bracing (if available).

Check that the delivery is complete.

Check the device and accessory parts for transport

damage. In case of complaints the dealer must be

informed immediately. Subsequent complaints will

not be accepted.

If possible, store the packaging until the warranty pe-

riod has expired. Read the operating manual to make

yourself familiar with the device prior to using it.

Only use original parts for accessories as well as for

wearing and spare parts. Spare parts are available

from your specialized dealer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach HL1600 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info