Bedienungsanleitung Scheppach HL3000GM (Seite 27 von 120) (Deutsch, Englisch, Französisch, Italienisch)

781854

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

GB | 27

When connecting to the mains or relocating the ma-

chine, check the direction of rotation (swap polarity in

the wall socket if necessary). Turn pole inverter in the

machine socket.

12. Cleaning

Attention!

Pull out the power plug before carrying out any clean-

ing work on the equipment.

We recommend that you clean the equipment imme-

diately after you use it.

Clean the equipment regularly with a damp cloth and

some soft soap. Do not use cleaning agents or sol-

vents; these may be aggressive to the plastic parts in

the equipment. Ensure that no water can get into the

interior of the equipment.

13. Transport

The kindling splitter can easily be transported with

the help of the three-point attachment on the tractor

unit.

Before transporting the kindling splitter, ensure it is

in the transport position. To do this, lower the riving

knife until it rests on the metal support. Remove the

two L-pins and lower the hydraulic cylinder so it is in

the transport position by pushing both operating han-

dles up or the return bracket down.

When driving, ensure sufcient turning space, e.g.

during reversing, parking and at junctions.

Before transporting the kindling splitter, ensure that

it is properly attached to the tractor unit and that the

drive shaft has been dismantled.

Never transport the kindling splitter when the

shaft drive is connected.

Ensure that the kindling splitter is raised high enough

to avoid obstacles during transport.

14. Storage

Store the device and its accessories in a dark, dry

and frost-proof place that is inaccessible to children.

The optimum storage temperature is between 5 and

30˚C.

Cover the electrical tool in order to protect it from

dust and moisture.

Store the operating manual with the electrical tool.

Transport position of the log lifter:

• Using your hand, move the log lifter up until it locks

in position.

Comply with these notices to ensure quick and

safe work.

11. Electrical connection

The electrical motor installed is connected and ready

for operation. The connection complies with the ap-

plicable VDE and DIN provisions.

The customer‘s mains connection as well as the ex-

tension cable used must also comply with these reg-

ulations.

Damaged electrical connection cable

The insulation on electrical connection cables is of-

ten damaged.

This may have the following causes:

• Passage points, where connection cables are

passed through windows or doors.

• Kinks where the connection cable has been im-

properly fastened or routed.

• Places where the connection cables have been cut

due to being driven over.

• Insulation damage due to being ripped out of the

wall outlet.

• Cracks due to the insulation ageing.

Such damaged electrical connection cables must not

be used and are life-threatening due to the insula-

tion damage.

Check the electrical connection cables for damage

regularly. Make sure that the connection cable does

not hang on the power network during the inspection.

Electrical connection cables must comply with the

applicable VDE and DIN provisions. Only use con-

nection cables with the marking „H07RN“.

The printing of the type designation on the connec-

tion cable is mandatory.

For single-phase AC motors, we recommend a fuse

rating of 16A (C) or 16A (K) for machines with a high

starting current (starting from 3000 watts)!

Three-phase motor 400 V / 50 Hz

Mains voltage 400 V / 50 Hz

Mains voltage and extension cables must be 5-lead

(3P + N + SL (3/N/PE). Extension cables must have

a minimum cross-section of 1.5 mm². Mains fuse pro-

tection is 16 A maximum.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach HL3000GM Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info