Bedienungsanleitung Scheppach HM80L (Seite 25 von 228) (Alle Sprachen)

781434

Zoom out

Zoom in

Vorherige Seite

1/228

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

GB | 25

5. Do not mix old and new batteries or batteries

of different types or manufacturers! Replace an

entire set of batteries at the same time.

6. Immediately remove used batteries from the

device and dispose of them properly! Do not

dispose batteries with household waste. Defective

or used batteries must be recycled according to

Directive 2006/66 / EC. Give back batteries and

/ or the device has been offered to the collective

facilities. About disposal facilities you can inform

by your municipal or city government.

7. Do not allow batteries to heat up!

8. Do not weld or solder directly on batteries!

9. Do not dismantle batteries!

10. Do not allow batteries to deform!

11. Do not throw batteries into re!

12. Keep batteries out of the reach of children.

13. Do not allow children to replace batteries without

supervision!

14. Do not keep batteries near re, ovens or other

sources of heat. Do not use batteries in direct

sunlight or store them in vehicles in hot weather.

15. Keep unused batteries in the original packaging

and keep them away from metal objects. Do not

mix unpacked batteries or toss them together!

This can lead to a short-circuit of the battery and

thus damage, burns or even the risk of re.

16. Remove batteries from the equipment when it will

not be used for an extended period of time, unless

it is for emergencies!

17. NEVER handle batteries that have leaked

without appropriate protection. If the leaked

uid comes into contact with your skin, the skin

in this area should be rinsed off under running

water immediately. Always prevent the uid from

coming into contact with the eyes and mouth.

In the event of contact, please seek immediate

medical attention.

18. Clean the battery contacts and corresponding

contacts in the device prior to inserting the

batteries.

7. Residual risks

The machine has been built according to the

state of the art and the recognised technical

safety requirements. However, individual residu-

al risks can arise during operation.

• Health hazard due to electrical power, with the use

of improper electrical connection cables.

• Furthermore, despite all precautions having been

met, some non-obvious residual risks may still re-

main.

• Residual risks can be minimised if the „safety in-

structions“ and the „Proper use“ are observed

along with the whole of the operating instructions.

6. Do not use any loose reducing rings or bushes for

the reducing of holes on saw blades.

7. Make sure that xed reducer rings for securing

the insertion tool have the same diameter and

have at least 1/3 of the cutting diameter.

8. Make sure that xed reducer rings are parallel to

each other.

9. Handle insertion tool with caution. They are

ideally stored in the originally package or special

containers. Wear protective gloves in order to

improve grip and to further reduce the risk of

injury.

10. Prior to the use of insertion tools, make sure that

all protective devices are properly fastened.

11. Prior to use, make sure that the insertion tool

meets the technical requirements of this electric

tool and is properly fastened.

12. Only use the supplied saw blade for cutting wood,

never for the processing of metals.

Attention: Laser radiation

Do not stare into the beam

Class 2 laser

Protect yourself and you environment from ac-

cidents using suitable precautionary measures!

• Do not look directly into the laser beam with un-

protected eyes.

• Never look into the path of the beam.

• Never point the laser beam towards reecting sur-

faces and persons or animals. Even a laser beam

with a low output can cause damage to the eyes.

• Caution - methods other than those specied here

can result in dangerous radiation exposure.

• Never open the laser module. Unexpected expo-

sure to the beam can occur.

• If the mitre saw is not used for an extended period

of time, the batteries should be removed.

• The laser may not be replaced with a different type

of laser.

• Repairs of the laser may only be carried out by the

laser manufacturer or an authorised representa-

tive.

Safety instructions for handling batteries

1. Always make sure that the batteries are inserted

with the correct polarity (+ and –), as indicated on

the battery.

2. Do not short-circuit batteries.

3. Do not charge non-rechargeable batteries.

4. Do not overcharge batteries!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach HM80L Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info