Bedienungsanleitung Scheppach HM90MP (Seite 24 von 168) (Deutsch, Englisch, Französisch, Italienisch, Polnisch, Alle Sprachen)

781435

Zoom out

Zoom in

Vorherige Seite

1/168

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

24 | GB

Even when the equipment is used as prescribed it is

still impossible to eliminate certain residual risk fac-

tors. The following hazards may arise in connection

with the machine’s construction and design:

• Contact with the saw blade in the uncovered saw

zone.

• Reaching into the running saw blade (cut injuries).

• Kick-back of workpieces and parts of workpieces.

• Saw blade fracturing.

• Catapulting of faulty carbide tips from the saw

blade.

• Damage to hearing if ear-mu󰀨s are not used as

necessary.

• Harmful emissions of wood dust when used in

closed rooms.

Please note that our equipment has not been de-

signed for use in commercial, trade or industrial appli-

cations. Our warranty will be voided if the equipment

is used in commercial, trade or industrial businesses

or for equivalent purposes.

5. Safety information

General power tool safety warnings

m WARNING! Read all safety warnings, instruc-

tions, illustrations and specications provided

with this power tool. Failure to follow all instruc-

tions listed below may result in electric shock, re

and/or serious injury.

Save all warnings and instructions for future ref-

erence.

The term “power tool” in the warnings refers to your

mains-operated (corded) power tool or battery-oper-

ated (cordless) power tool.

1) Work area safety

a) Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

b) Do not operate power tools in explosive at-

mospheres, such as in the presence of am-

mable liquids, gases or dust.

Power tools create sparks which may ignite the

dust or fumes.

c) Keep children and bystanders away while

operating a power tool.

Distractions can cause you to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet. Nev-

er modify the plug in any way. Do not use

any adapter plugs with earthed (grounded)

power tools.

Unmodied plugs and matching outlets will re-

duce risk of electric shock.

3. Scope of delivery

• Sliding compound mitre saw

• 1 x Clamping device (7) (preassembled)

• 2 x Workpiece support (8) (preassembled)

• Chip collection bag (17)

• Allen key 6 mm (C)

• Operating manual

4. Intended use

The sliding compound mitre saw is designed to cross-

cut wood and plastic respective of the machine’s size.

The sliding cross cut mitre saw is not designed for

cutting rewood.

Warning!

Do not use the sliding cross cut mitre saw to cut mate-

rials other than those specied described in manual.

Warning!

The supplied saw blade is intended exclusively for

sawing the following materials:

wood, wood derived products (MDF, chipboard, ply-

wood, blockboard, hardboard, etc.), wood with nails

and 3 mm mild steel plates.

Note:

Wood containing non-galvanised nails or screws can

also be safely cut when carefully handled.

Note:

Do not use the saw blade to cut galvanised materials

or wood containing galvanised nails.

Do not use the saw blade to saw rewood!

The equipment is to be used only for its prescribed

purpose. Any other use is deemed to be a case of

misuse. The user / operator and not the manufacturer

will be liable for any damage or injuries of any kind

caused as a result of this.

The equipment is to be operated only with suitable

saw blades. It is prohibited to use any type of cut-

ting-o󰀨 wheel.

To use the equipment properly you must also observe

the safety information, the assembly instructions and

the operating instructions to be found in this manual.

All persons who use and service the equipment have

to be acquainted with this manual and must be in-

formed about the equipment’s potential hazards.

It is also imperative to observe the accident preven-

tion regulations in force in your area.

The same applies for the general rules of health and

safety at work.

The manufacturer will not be liable for any changes

made to the equipment nor for any damage resulting

from such changes.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach HM90MP Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info