Bedienungsanleitung Scheppach HMS850 (Seite 26 von 148) (Deutsch, Englisch, Dänisch, Französisch, Italienisch, Polnisch)

759249

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

26 GB

12. Electrical Connection

m WARNING! Electric shock! There is a risk of

an injury caused by electric shock!

Defective cable or plug may cause electric shock.

Avoid body contact with earth parts to protect your-

self from electric shocks.

m Operation is only allowed with a safety switch

against stray current (RCD max. stray current of

30mA).

Insert the plug of the electrical cable in a socket of

suitable shape, voltage and frequency complying

with current regulations.

Do not pull the service cable to pull the plug out of

socket.

The electric motor is connected in a ready-to-

operate state. The connection corresponds to

the relevant VDE and DIN regulations.

The mains connection at the customer’s work

place and the extension cable used must cor-

respond to these regulations.

• The product meets the requirements of EN

61000-3-11 and is subject to special connection

conditions. This means that use of the product

at any freely selectable connection point is not

allowed.

• Given unfavorable conditions in the power sup-

ply the product can cause the voltage to uctu-

ate temporarily.

• The product is intended solely for use at con-

nection points that

a) do not exceed a maximum permitted supply

impedance „Z“, or

b) have a continuous current-carrying capacity

of the mains of at least 100 A per phase.

• As the user, you are required to ensure, in con-

sultation with your electric power company if

necessary, that the connection point at which

you wish to operate the product meets one of

the two requirements, a) or b), named above.

Important information

In the event of an overloading the motor will switch

itself off. After a cool-down period (time varies) the

motor can be switched back on again.

Faulty electrical connecting leads

Insulation damage often occurs at electrical con-

necting leads.

Causes include:

• Pressure marks caused when connecting leads

are run through windows or the cracks of doors.

• Folds caused by the improper attachment of run-

ning of the connecting leads.

• Cutsresulting from the crossing of the connect-

ing lead.

• Insulation damages caused by the ripping out of

the connecting lead from the wall socket.

• Cracks due to the ageing of the insulation.

Faulty electrical connecting leads such as these

may not be used and are highly dangerous due to

the insulation damage.

Check electrical connecting leads regularly for

damage. Ensure that the connecting lead is not at-

tached to the mains supply when you are checking

it.

Electrical connecting leads must correspond to the

relevant VDE and DIN regulations. Only use con-

necting leads with the code H05VV-F.

The type designation must be printed on the con-

necting lead by regulation.

AC motor

• The supply voltage must be 230 volt ~ / 50 Hz.

• Extension leads up to 25 m in length must have

a cross-section of 1.5 mm², > 25 m length / 2,5

mm².

Connections and repairs of electrical equipment

may only be performed by a qualied electrician.

Please give the following information if you have

any enquiries:

• Kind of current

• Machine type label data

• Data on the main label

13. Disposal and recycling

The equipment is supplied in packaging to prevent it

from being damaged in transit. The raw materials in this

packaging can be reused or recycled. The equipment

and its accessories are made of various types of mate-

rial, such as metal and plastic. Never place defective

equipment in your household refuse. The equipment

should be taken to a suitable collection center for proper

disposal. If you do not know the whereabouts of such a

collection point, you should ask in your local council of

ces.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach HMS850 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info