Bedienungsanleitung Scheppach HP2200S (Seite 24 von 148) (Deutsch, Englisch, Französisch, Italienisch, Polnisch)

781866

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58  www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

24 | GB

m ATTENTION!

The device and packaging materials are not toys!

Children must not be allowed to play with plas-

tic bags, lm and small parts! There is a risk of

swallowing and suffocation!

6. Construction

Fitting the handle (g. A - F):

• Fasten the handle (2) to the plate compactor (a)

with the help of the screw and the star-grip nut (b).

Screw is pushed through from the outside and fas-

tened with the screw and star-grip nut.

• Now fasten the throttle (1) to the handle (2) (size

8/10). The Bowden cable is fastened to the handle

(2) by mean of cable ties.

Fitting the rubber pad (g. G + H):

• Rubber pad (c): Place or pull the plate compactor

onto the rubber pad (c) and align the holes. Then

fasten in place from below with the three fastening

screws (e).

Fitting the transport xture (g. X + Y):

• Transport xture (f): Tip the plate compactor for-

wards with the handle (2) and align the transport

xture (f) in the hole provided for it. The plate com-

pactor can now be set back down again and trans-

ported.

7. Safety information

• Understand your machine

• Read and understand the operator’s manual and

labels afxed to the machine.

• Learn its application and limitations as well as the

specic potential hazards peculiar to it.

• Be thoroughly familiar with the controls and their

proper operation.

• Know how to stop the machine and disengage the

controls quickly.

• Do not attempt to operate the machine until you

fully understand how to properly operate and main-

tain the Engine and how to avoid accidental injuries

and/or property damage.

• Keep children and bystanders off and away.

Work area

• Never start or run the engine inside a closed area.

The exhaust fumes are dangerous, containing car-

bon monoxide, an odourless and deadly gas. Op-

erate this unit only in a well ventilated outdoor area.

• Never operate the machine without good visibility

or light.

Vibration characteristics

Vibration ah 30 m/s²

Note: The indicated sound levels have been deter-

mined according to a standardized testing procedure

and can be used to compare different tools with each

other. Furthermore, these values are suitable to eval-

uate the loads that sounds can cause for the user in

advance.

Attention! Depending on how you will use the tool,

the actual values may deviate from the indicated val-

ues. Take measures to protect yourself from noise

pollution. In this process it is important to take the

complete sequence of operation into account. This

also includes moments during which the power tool

operates without load and moments during which it

is turned off. Suitable measures comprise amongst

other things regular maintenance and service of the

tool and the insertion tools, regular breaks and the

appropriate planning of the sequences of operation.

4. Scope of delivery

• 1x Plate Compactor (a)

• 1x Handle (2)

• 2x Star-grip nut with screw (b)

• 1x Rubber pad (c)

• 3x Fastening screw with washer and nut (e)

• 1x Transport xture (f)

• 1x Spark plug wrench (g)

• 2x Cable tie (h)

• 1x Operator’s Manual (i)

5. Unpacking

Open the packaging and remove the device carefully.

Remove the packaging material as well as the pack-

aging and transport bracing (if available).

Check that the delivery is complete.

Check the device and accessory parts for transport

damage. In the event of complaints the carrier must

be informed immediately. Later claims will not be rec-

ognised.

If possible, store the packaging until the warranty pe-

riod has expired.

Familiarise yourself with the product by means of the

operating instructions before using for the rst time.

With accessories as well as wearing parts and re-

placement parts use only original parts. Replacement

parts can be obtained from your dealer.

When ordering please provide our article number as

well as type and year of manufacture for your equip-

ment.

IM_5904612903_HP2200s_191212_new.indd 24IM_5904612903_HP2200s_191212_new.indd 24 12.12.2019 07:40:1912.12.2019 07:40:19

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach HP2200S Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info