Bedienungsanleitung Scheppach HSM3500 (Seite 25 von 92) (Deutsch, Englisch, Französisch, Spanisch)

781910

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

GB | 25

• Hearing damage due to non-use of the required

hearing protection.

• Injuries to the eyes due to non-use of eye pro-

tection

Any use beyond the one specied will be treated

as improper. The manufacturer will not be liable for

damages resulting from such improper use; the risk

will be borne by the user alone.

Please note that our equipment has not been de-

signed for use in commercial, trade or industri-

al applications. Our warranty will be voided if the

equipment is used in commercial, trade or industrial

businesses or for equivalent purposes.

5. Technical data

Production dimensions

L x W x H

1200 x 600 x 1260 mm

Cutting table 530 x 430 mm

Diamond cutting wheel ø 350 mm

Hole ø 25,4 mm

Speed 2800 1/min

Weight 72,3 kg

Max. cutting length 800 mm

Max 90° cutting height 110 mm

Max. 45° cutting

height

72 mm

Motor 230-240 V / 50 Hz

Power intake 2000 W (S6 40%)

Insulating material

class

Protection type IP54

Technical changes reserved!

Noise characteristic values

Noise at the workplace can exceed 85 dB (A). In this

case, noise protection measures are necessary for

the user (wear hearing protection!).

Noise output level in dB

LWA idling / processing of LWA = 90/93 dB (A)

Noise pressure level at workplace in dB

LPA idling / processing of LPA = 77/80 dB (A) according

to DIN EN ISO 3744; EN ISO 11201

• Please quote our article numbers as well as type

and production year in all your orders.

4. Proper use

The machine corresponds to the valid EU Ma-

chine Directive

• Before starting work, all the protection- and safety

devices must be installed on the machine.

• The machine is designed for operation by one per-

son. The operator will be responsible for the pres-

ence of third persons in the work area.

• Observe all safety- and danger instructions on the

machine.

• Keep all safety and danger instructions near the

machine in complete and readable form.

• The machine with the offered tool and accesso-

ries is exclusively designed for the cutting of tile

and concrete blocks with a cutting height of up

to 110 mm. The cutting of metal and wood is not

permitted.

• The dimensions of the workpieces to be machined

should not exceed or fall below the specied max-

imum and minimum dimensions.

• Please use the machine only if it is in a technically

fault-free condition. Use It properly, conscious of

the involved safety and risk factors and giving due

consideration to the operating instructions manual!

Faults, especially those that can affect safety must

be rectied immediately!

• The safety-, workplace- and maintenance spec-

ications of the manufacturer as well as the di-

mensions specied in the technical data must be

observed.

• The applicable accident prevention measures and

the other generally recognized technical safety

rules must be observed.

• The machine must be used, serviced or repaired

only by persons who are familiar with it and who

have been briefed about its risks. Arbitrary alter-

ations to the machine will make the liability of the

manufacturer for damages resulting there from null

and void.

• The machine may be used only with original ac-

cessories and original tools of the manufacturer.

Despite proper use, certain residual risk factors

cannot be eliminated fully. The following things can

occur, depending on the design and structure of the

machine:

• Intervention in the running diamond cutting disc.

• Contact with the diamond cutting disc in exposed

area.

• Ejection of work pieces and work piece compo-

nents.

• Ejection of a faulty diamond attachment in the cut-

ting disc.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach HSM3500 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info