Bedienungsanleitung Scheppach HTH250 (Seite 27 von 104) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Polnisch, Schwedisch)

782035

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

27GB

Transport

To transport the device stop the engine and wait until

the cutting device does not longer move. Attach the pro-

tective cover.

Carry the device with the front handle.

When transporting the device within a car put it in the

boot or on a separate loading area. Secure the hedge

trimmer against tipping over, damages and fuel spillage.

12. Disposal and recycling

The disposal instructions are based on icons placed on

the appliance or its package.

The package protects the appliance against damage

during transport. Packing materials are usually chosen

depending on their environmental friendliness and dis-

posal method and can therefore be recycled. Returning

the package to material circulation saves raw materials

and reduces waste disposal costs.

Parts of packages (e.g. foils, styropor®) can be

dangerous to children.Risk of suffocation!

Keep parts of packages away from children and dispose

them as soon as possible.

Service information

Please note that the following parts of this product are

subject to normal or natural wear and that the following

parts are therefore also required for use as consumables.

Wear parts*: Cutting device, spark plug, air lter, fuel l-

ter

* Not necessarily included in the scope of delivery!

11. Storage & Transport

Storage

Store unused devices with attached protective cover in

a dry, locked place out of the reach of children.

To extend the service life of the hedge trimmer and

guarantee smooth operation, before storing for a longer

period.

Thoroughly clean the device.

Treat all movable parts with an environmentally friendly.

oil.

Never use any grease!

Slide the protective cover on the cutting device.

Remove the spark plug connector.

Empty the fuel tank completely.

Dispose of remaining fuel in an environmentally com-

patible manner.

Operate the engine until the carburettor is empty.

13. Troubleshooting

Fault Possible cause Remedy

Hedge trimmer does not work. • No fuel supply

• Fault in the fuel line

• Fuel lter clogged

• Spark plug defective

• Carburettor defective

• Internal fault.

• Check the fuel quantity

• Check the fuel line for kinks or dam-

ages

• Clean/replace the fuel lter

• Replace the spark plug

• Manufacturer or responsible custom-

er service must be called

• Manufacturer or responsible custom-

er service must be called

Hedge trimmer cuts with interruptions • Internal fault.

• ON / OFF switch defective.

• Manufacturer or responsible custom-

er service must be called

• Manufacturer or responsible custom-

er service must be called

Engine is running, cutting device does

not move • Cutting device blocked

• Internal fault.

• Clutch defective

• Remove object

• Manufacturer or responsible custom-

er service must be called

• Manufacturer or responsible custom-

er service must be called

Cutting device gets hot • Missing lubrication => friction

• Not enough play

• Cutting blades are blunt

• Oil the cutting device

• Adjust the sliding play

• Have the cutting device sharpened

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach HTH250 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info