Bedienungsanleitung Scheppach KS55PS Kity (Seite 20 von 72) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

782280

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

20 GB

6. Technical data

Dimensions L x W x H mm 340 x 260 x 235

Saw blade ø mm / number

of teeth 160 x 20 / 24Z

Idling speed n05500 1/min

Mitre square 0°–45°

Depth of cut 90° mm 55

Depth of cut 45° mm 41

Weight kg 5

Drive

Motor V/Hz 230-240/50

Input W 1200

Protection class II

Operating noise level and vibrations

Sound pressure level LpA: 95 dB(A),

KpA: 3 dB(A)

Sound power level LwA: 106 dB(A),

KwA: 3 dB(A)

Typical weighted vibrations ah = 5,72 m/s²,

K = 1,5m/s²

Measured values corresponding to EN 60 745-

2-5 and EN 60 745-1

Subject to technical modications!

Warning: Noise can have adverse health effects.

Should the noise level increase above 85 dB(A), you

must wear ear protection. Should the electrical supply

not be optimal, then the current can drop for a short

time when the machine is turned on. This can inu-

ence other equipment (for example, the blinking of

a lamp). Should the electrical capacity have a Zmax

< 0.27, such disturbances are not to be expected.

(Should you have difculties, please consult your lo-

cal dealer.)

Warning:

The actual vibration emission value during use of the

machine may differ from the vibration emission value

indicated in the operating manual or by the manufac-

turer. This can be caused by the following inuencing

factors to which attention should be paid both before

and during every use::

• Is the device being properly used

• Is the type of material to be processed correct

• Is the device in good working order

• Are the handles or, if applicable, the optional anti-

vibration handles installed and rmly attached to the

body of the machine

If you experience discomfort or the skin on your hands

discolours during use of the machine, cease work im-

mediately.

Take sufcient breaks from work. If you do not take

sufcient breaks from your work, you may experience

Hand-Arm Vibration Syndrome.

The degree of stress should be estimated depending

on the work or use of the machine, and appropriate

breaks from work incorporated accordingly. In this

way it is possible to signicantly reduce the degree

of stress throughout the entire working time. Minimise

the risk that you are exposed to due to vibrations.

Maintain this machine in accordance with the instruc-

tions in the operating manual.

If the machine is to be used or operated frequently,

you should contact your specialist dealer and request

anti-vibration accessories (handles) if applicable.

Avoid use of the machine at temperatures of t=10°C

or lower. Formulate a working plan through which it is

possible to limit vibration stress.

7. Remaining hazards

The machine has been built using modern technology

in accor dance with recognized safety rules. Some re-

maining hazards, how ever, may still exist.

The use of incorrect or damaged mains cables can

lead to injuries caused by electricity.

Even when all safety measures are taken, some re-

maining hazards which are not yet evident may still

be present.

Remaining hazards can be minimized by following the

instructions in „Safety Precautions“, „Proper Use“ and

in the entire operating manual.

Do not force the machine unnecessarily: excessive

cutt ing pressure may lead to rapid deterioration of the

blade and a decrease in performance in terms of n-

ish and cutting precision.

When cutting aluminium and plastics always use the

app ro priate clamps: all workpieces must be clamped

down rmly.

Avoid accidental starts: do not press the start button

while inserting the plug into the socket.

Always use the tools recommended in this manual to

obtain the best results from your plunge cut saw.

Always keep hands away from the work area when

the ma chine is running; before performing tasks of

any kind release the main switch button located on

the handgrip, thus disconnecting the machine.

8. Suitable use

Correct use

To cut:

• Hard and soft, domestic and exotic wood both lon-

gitudinally and transversally and with appropriate

adjustments (specic blade and clamps);

Unsuitable use

Do not cut:

• Ferrous materials, steel and cast iron or any oth-

er material not mentioned above and in particular

foodstuffs

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach KS55PS Kity Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info