Bedienungsanleitung Scheppach MBS1100 (Seite 23 von 172) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Polnisch, Schwedisch)

781683

Zoom out

Zoom in

Vorherige Seite

1/172

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

GB | 23

4. Intended use

The portable metal band saw with speed setting is

exclusively suited for cutting wood, tubes, proles

and thin non-ferrous metals.

The shape of the workpieces must be such that safe

clamping in the machine vice is possible and such

that the workpiece is prevented from jumping out

during the sawing process.

The machine is to be operated only with suitable saw

blades. To use the machine properly you must also

o serve the safety regulations, the assembly instruc-

tions and the operating instructions to be found in

this manual.

All persons who use and service the machine have

to be acquainted with this manual and must be in-

formed about the machine’s potential hazards.

It is also imperative to observe the accident preven-

tion regulations in force in your area. The same ap-

plies for the general rules of occupational health and

safety.

The manufacturer shall not be liable for any changes

made to the machine nor for any damage resulting

from such changes.

Even when the machine is used as prescribed it is

still impossible to eliminate certain residual risk fac-

tors. The following hazards may arise in connection

with the machine’s construction and design:

• Damage to hearing if ear-muffs are not used as

necessary.

• Harmful emissions of wood dust when used in

closed rooms.

• Contact with the blade in the uncovered cutting

zone.

• Injuries (cuts) when changing the blade.

• Injury from catapulted workpieces or parts of work-

pieces.

• Crushed ngers.

• Kickback.

• Tilting of the workpiece due to inadequate support.

• Touching the blade.

• Catapulting of pieces of timber and workpieces.

Please note that our equipment has not been de-

signed for use in commercial, trade or industrial ap-

plications. Our warranty will be voided if the machine

is used in commercial, trade or industrial businesses

or for equivalent purposes.

5. General safety instructions for

power tools

• WARNING Read all warnings and instructions.

Failure to apply all warnings and instructions can

lead to electrical shock, re and/or serious injury.

• Keep all warnings and instructions handy for

future consultation.

• The term “power tool” used in the warnings refers

to power tools that are connected to a source of

electrical energy (with an electrical cable).

1 Workplace safety

• Keep your working area clean and well lit. Clut-

tered or dimly lit workspaces can lead to accidents.

• Do not operate power tools in areas where explo-

sions could take place, or in which ammable liq-

uids, gases or dust are present. Power tools can

create sparks, which can cause dust or fumes to

ignite.

• Keep children and bystanders away from the pow-

er tool when it is being used. Distractions could

cause you to lose control over the equipment.

2 Electrical safety

• The terminal plug of the tool must t into the outlet.

The plug may not be modied in any way. Do not

use an adaptor plug together with grounded power

tools. The original plugs and the appropriate out-

lets reduce the risk of an electrical shock.

• Avoid contact with grounded surfaces, such as

pipes, radiators, stoves and refrigerators. There

is an increased risk of electrical shock, if your body

is grounded.

• Keep power tools away from rain or wet conditions.

Penetration of water into the power tool increases

the risk of electrical shock.

• Do not use the cable for any purpose other than

that for which it was made. Do not use it to carry

the tool, hang it up, or to pull the plug out of the

outlet. Keep the cable away from heat, oil, sharp

corners or parts of the equipment that move. Dam-

aged or entangled cords increase the risk of elec-

trical shock.

• When operating the power tool outdoors, only use

extension cords that are suitable for outdoor use.

The use of an appropriate extension cord reduces

the risk of an electrical shock.

• If the power tool must be used in a damp environ-

ment, use a residual current protective device. The

use of such a device reduces the risk of electrical

shock.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach MBS1100 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info