Bedienungsanleitung Scheppach MP132-40 (Seite 27 von 52) (Deutsch, Englisch, Französisch)

781693

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

GB | 27

• Never lift or carry a lawn mower with the engine

running.

• Switch o󰀨 the engine and pull the spark plug boot.

Make sure that all rotating parts are stopped:

– before you dislodge any blockages or clogs in

the chute.

– before carrying out any checks, cleaning, main-

tenance or other work on the lawn mower

– if the lawn mower strikes a foreign body, ex-

amine it for signs of damage and carry out any

necessary repairs before restarting and continu-

ing to work with the mower. If the lawn mower

begins to experience exceptionally strong vibra-

tions, immediately switch it o󰀨 and check it.

• Switch o󰀨 the engine:

– when you leave the lawn mower.

– before you refuel.

• Operation of the machine at higher than normal

speed can lead to an increased risk of accidents.

• Take care when carrying out installation work on

the machine, and avoid trapping ngers between

the moving cutting tool and the xed parts of the

machine.

• Please be particularly careful when mowing on

ground that may subside, on nearby landlls,

trenches and embankments.

• Observe improper maintenance, the use of non-

compliant spare parts, or removal or modication

of the safety devices may result in damage to the

device and serious injury to the person working

with it.

• Use only manufacturer recommended cutting tools

and accessories. The use of other tools and other

accessories may cause injury to the user. Always

keep the lawnmower in good working condition.

• Check the device regularly and make sure before

each use that all start locks and push buttons

function properly.

• Please note that the safety systems or features

of the lawnmower must not be tampered with or

deactivated.

• Note that the user should not modify or manipulate

any sealed engine speed control settings.

• The user must be adequately trained in use,

adjustment and operation (including prohibited

operations).

• It is necessary to take su󰀩cient breaks to reduce

the noise and vibration load.

Residual risks and accident prevention

standards

Neglect of ergonomic principles

Negligent handling of personal protective equip-

ment (PPE)

Negligent handling or ommission of the personal pro-

tective equipment may cause serious injuries.

– Wear prescribed personal protection equipment.

Human behaviour, misbehaviour

– For any work be fully concentrated.

m Residual risks - Cannot be entirely excluded.

Danger from noise

hearing damage

Prelonged unprotected work with the device may

cause hearing damage.

– Always wear ear-mu󰀨s.

In case of emergency

In case of a possibly occuring accident take the nec-

essary rst aid steps as appropriate and obtain quali-

ed medical aid as quickly as possible.

During longer work, because of vibrations, there is

a risk of circulation problems in the user‘s hands

(white-nger-syndrome). White-nger-syndrome is

a vascular disease where the small blood vessels in

ngers and toes contract seizure-like. The a󰀨ected

areas are no longer supplied with blood and there-

fore look very pale.

Frequent use of vibrating machines can cause nerve

damage in people whose circulation is compromised

(e.g. smokers, people with diabetes).

If you notice unusual impairment, immediately stop

the work and consult a doctor. Observe the following

notices in order to reduce risks:

• Keep your body, and particularly your hands, warm

in cold weather.

• Take regular breaks during which you should move

your hands to promote circulation.

• Ensure the lowest possible vibration of the ma-

chine by regularly maintaining it and keeping com-

ponents tight.

6. Technical data

MP132-42

Technical data

Type engine four stroke engine/air cooled

Cubic capacity 132 cm3

Rotation speed 2800 U/min

Fuel Normalbenzin/Bleifrei max.

10% Bioethanol

Capacity tank/gasoline 0,8 l

Motor oil SAE 30/10W30

Capacity tank/oil 0,4 l

Cutting height

adjustment 30 - 66 mm / 3 times

Collection bag capacity 35 l

Cutting width 40 cm

Weight 16,6 kg

Power kw 2,5

Subject to technical changes!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach MP132-40 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info