Bedienungsanleitung Scheppach MP132-40 (Seite 31 von 52) (Deutsch, Englisch, Französisch)

781693

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

GB | 31

After mowing

• Allow the engine to cool before you put the lawn

mower in an enclosed area.

Remove grass, foliage, grease and oil before

storing the mower. Do not place any objects on top

of the mower.

• Check all the screws and nuts once more before

you start to use the lawn mower again. Tighten

any loose screws.

• Also be sure to empty the grass basket (16).

• Pull the spark plug boot to prevent unauthorized

use.

• Ensure that you do not park the mower next to

any source of danger. Petrol fumes can lead to

explosions.

• Only original parts or parts approved by the

manufacturer may be used for repairs (see

address on the warranty certicate).

• If the lawn mower is not going to be used for an

extended period, empty the petrol tank using a

petrol suction pump.

• Oil and maintain the machine.

9. Maintenance and cleaning

• Regular, careful maintenance is required to

guarantee the safety level and performance of the

machine.

• Make sure that all nuts, bolts and screws are

tightened securely and that the machine is in safe

working condition.

• Routinely check the grass basket for signs of wear

and impaired functionality.

Regularly clean the grass box with water and let it

dry thoroughly.

• For your own safety, replace worn or damaged

parts without delay.

• If the fuel tank should require emptying this should

only be done in the open air using a petrol suction

pump (available from DIY shops).

m WARNING

Never work on or touch conducting parts on the

ignition unit with the engine running. Always pull the

spark plug boot from the spark plug before starting

any work of care or maintenance. Never perform any

work on the machine while it is running. Any work not

described in these Operating Instructions must be

performed by an authorized service workshop only.

Pay attention to moving knife assemblies.

Cleaning

The lawn mower should be thoroughly cleaned after

every use, especially the underneath and the blade

mount. To do so, tip the lawn mower onto its left side

(the opposite side to the oil lling socket).

m Note! Before you tip the lawn mower onto its

side, completely empty the fuel tank using a petrol

suction pump. The lawn mower must never be tilted

by more than 90 degrees. Dirt and grass is easiest to

remove immediately after you have nished mowing

the grass. Dried on grass and dirt can result in poorer

mowing performance. Check that the grass chute is

free of any residual grass. Remove any such residue.

Never clean the lawn mower with a water jet or high-

pressure cleaner. The engine must remain dry. Do not

use aggressive cleaning agents such as cold cleaner or

petroleum ether.

Wheel axles and wheel hubs

• These should be lightly greased once a season.

Blade

For safety reasons you should only ever have your

blade sharpened, balanced and mounted by an author-

ized service workshop. For optimum results it is recom-

mended that the blade should be inspected once a year.

Replacement number: 7911200619

Changing the blade (Fig.17)

Only ever use original spare parts when having the

blade replaced.

Wear gloves when replacing the blade in order to

prevent injury.

Never have any other blade tted.

• Empty the fuel tank before removing the blade

• To replace the blade, undo the screw.

• Reinstall as illustrated in Fig. 17. Tighten the screw

properly. Tightening torque 45 Nm. When replac-

ing the blade, the blade screw should also be

replaced.

Damaged blades

Should the blade, in spite of all precautions, come

into contact with an obstruction, shut down the

engine immediately and pull the spark plug boot. Tip

the lawn mower onto its side and check the blade for

damage. Damaged or bent blades must be replaced.

Never attempt to bend a bent blade back to straight

again. Never mow the lawn with a bent or heavily

worn blade as this will cause vibrations and can lead

to further damage to the lawn mower.

m CAUTION! There is a risk of injury if you work

with a damaged blade.

Resharpening the blade

The blades can be resharpened with a metal le.

In order to avoid imbalance, the blade should be

resharpened by an authorized service workshop

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach MP132-40 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info