Bedienungsanleitung Scheppach MTP560 (Seite 23 von 156) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

781418

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

GB | 23

- Inhalation of the cutting material

- This electric tool generates an electromagnet-

ic eld during operation. This eld can impair

active or passive medical implants under certain

conditions. In order to prevent the risk of serious

or deadly injuries, we recommend that per-

sons with medical implants consult with their

physician and the manufacturer of the medical

implant prior to operating the tool.

6. Technical data

Engine: 4-stroke engine,

150 cm³

Engine rating: 2.7 kW/ 3.7 hp

Engine working speed: 2800 rpm

Working width: 560 mm

Hoe blade diameter Ø: 260 mm

Starting system: reversing

starter

Fuel: Unleaded petrol

min. 90 octane

max. 5%

bio-ethanol

Engine oil: 0.4l (15W40)

Tank capacity: 0.8 l

Weight: 29.2 kg

Spark plug: LG F6RTC

Depth: 130 mm

Measured acoustic power level LpA: 71.23 dB(A)

K uncertainty: 2 dB(A)

Measured acoustic power level LwA: 91.23 dB(A)

K uncertainty: 2 dB(A)

Guaranteed acoustic power level LwA: 93 dB(A)

Vibration value ahw: (left) 11.08 m/s2/ (right) 15.72 m/s2

K uncertainty: 1.5 m/s2

ATTENTION: The value of vibration emitted dur-

ing product usage may di󰀨er from the declared

value depending on the circumstances.

Safety measures to protect the operator are based

on an estimate of exposure under normal conditions

of use (taking into account all operating cycles such

as the time when the tool is shut o󰀨, when operating

empty or in use).

7. Assembly

1. At rst check all parts of the device and place

them in front of you on the oor (Fig. 2 + 3).

2. To enhance the stability of the machine mount the

depth stop (10) and x it with pin (B) (Fig. 5).

3. Mount the handles (M) at the handle bar mount (6)

with the delivered bolts (Fig. 6).

4. Mount the blade extension (11.1) as shown in gure 7.

5. Mount the blade guard extension (9.1) as shown

in gure 8.

6. Mount the accelerator (16) as shown in gure 9.

10. Always operate the machine from behind, never

pass or stand in front of the machine when the

engine is running.

11. Always hold the unit with both hands when oper-

ating. Keep a rm grip on the handlebars.

12. Be aware that the machine may unexpectedly

bounce upward or jump forward if the tines should

strike buried obstacles such as large stones,

roots, or stumps.

13. If the unit strikes a foreign object, stop the engine,

disconnect the spark plug, thoroughly inspect the

machine for any damage, and repair the damage

before restarting and operating the machine.

14. Use extreme caution when in reverse ornpulling

the machine towards you.

15. Do not overload the machine capacity by tilling

too deep in a single pass or at too fast a rate.

16. Never operate the tiller at high transport speeds

on hard or slippery surfaces.

17. Be careful when tilling in hard ground. The tines

may catch in the ground and propel the tiller for-

ward. If this occurs, let go of the handlebars and

do not restrain the machine.

18. Use caution when tilling near fences, buildings

and underground utilities. Rotating tines can

cause property damage or personal injury.

19. Exercise extreme caution when operating on or

crossing gravel drives, walks, or roads. Stay alert for

hidden hazards or tra󰀩c. Do not carry passengers.

20. Never leave the operating position when the en-

gine is running.

21. Always stop the engine when tilling is delayed or

when walking from one tilling location to another.

22. Keep unit clean of vegetation and other materi-

als. They may become lodged between the tines.

Stop the engine and disconnect the spark plug

before unclogging the tines.

Repairs

Use only the accessory and spare parts recommend-

ed by the manufacturer. If the machine suers a fail-

ure despite our quality controls and your care, have

repair work carried out only by a trained electrician.

Environmental protection

Do not simply dispose of the machine, accessories

and packaging in the dustbin, but ensure that it can

be recycled. A small amount of e󰀨ort on your part can

do a great deal of good for our environment.

Residual risks

Even though using the machine properly there will

always remain a residual risk which can‘t be eliminat-

ed. From the type and construction of the machine

following dangers can occur:

- Ejection of parts of the cutting material

- Damage of hearing if no prescribed hearing

protection is worn

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach MTP560 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info