Bedienungsanleitung Scheppach Multi Cut 5 (Seite 17 von 136) (Deutsch, Englisch, Französisch, Italienisch, Polnisch)

782264

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

6. Special safety instructions

Never reach into the sawing area or into the area

surrounding the saw blade.

Always hold the handle or motor casing with your

other hand. If you use both hands to hold the saw

it will reduce the risk of injury.

Ensure that you hold the saw tightly at all times so

that you do not lose control of it.

Never stand in line with the saw blade. Always

stand to the right or left of the saw blade. Any

recoil may result in the saw jumping backwards.

Never reach below the workpiece. The safety

hood over the saw blade does not offer any

protection from the saw blade underneath the

workpiece.

Never remove sawn pieces whilst the saw blade is

still turning.

Before using the saw ensure that the pivot safety

hood is in good working order. The pivot safety

hood must move freely and must close immedia-

tely. The pivot safety hood must never be locked

in its open position.

If you have dropped the saw by accident, check

the pivot safety hood for signs of damage and

ensure that it is in good working order. To check

this, open the pivot safety hood with the handle

and ensure that the safety hood moves freely

and that it does not touch the saw blade or other

parts at any cutting angle or cutting depth.

Check the condition and function of the return

spring on the pivot safety hood at regular inter-

vals. The saw must not be used if the spring and

the safety hood are not in good working order.

These components must be repaired before the

saw may be used again.

Resin deposits or dirt accumulations can cause

the pivot safety hood to move more slowly. In this

case, disconnect the machine from the mains sup-

ply, remove the saw blade and clean the safety

hood and the hood area.

The pivot safety hood may only be opened manu-

ally for special cuts, such as submersed or shifting

cuts.

In this case open the pivot safety hood using the

appropriate handle. The pivot safety hood must

be released again as soon as the saw blade has

engaged in the material.

The use of the automatic pivot safety hood func-

tion must be used for all other cuts.

After you release the ON/OFF switch it will take a

little time before the saw blade reaches a stand-

still.

Before you put down the saw ensure that the

pivot safety hood is completely closed and that

the saw blade has reached a standstill. An unguar-

ded, freely turning saw blade may cause the saw

to catapult out of control.

Never hold the workpiece you wish to saw in your

hand or place it on your leg. Always place workpi-

eces in a vice or clamp.

Always hold the machine using the insulated

handles provided whilst it is in use. This will pre-

vent the risk of a fatal electric shock if the saw

blades come into contact with live cables.

Never use normal carbide metal blades. Twin saw

blades have a different shape. Normal saw blades

will not fit the fastening device on the saw and

may result in serious injuries.

Never use damaged or non-fitting washers or

bolts to fit the saw blade.

Washers, bolts and flanges have been specially

designed for this saw to ensure perfect operating

safety and performance.

Never carry the saw in your hands whilst it is run-

ning. If it comes into contact with your clothing

there is a possibility that the pivot safety hood

will open. Contact with the rotating saw blade

can cause extremely serious injuries.

Depending on how and for what purpose the

saw is used, the service life of the ON/OFF switch

may be shorter than that of the saw itself. If the

switch breaks whilst eh saw is switched off, you

may find that it is no longer possible to switch the

saw on again. If the switch breaks whilst the saw

is in use, you may find that it is no longer possible

to switch the saw off again. In both cases pull

the mains plug out of the socket without delay.

The saw must not be used again until it has been

repaired by an expert.

Always use a riving knife for sawing large panels.

Remember at all times that it is possible for the

saw to recoil. If the saw jams and is catapulted

back at the user, this is known as a recoil.

Immediately release the switch if the saw jams or

the saw blade becomes tuck. Do not use force to

remove the saw from the material. Never pull the

saw out of the material whilst the saw blade is still

moving.

Do not use bent or torn saw blades.

Do not solder or weld saw blade cracks or weld

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach Multi Cut 5 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info