Bedienungsanleitung Scheppach OSM100 (Seite 10 von 56) (Deutsch, Englisch, Französisch, Italienisch)

781480

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

10 english

Manufacturer:

scheppach Fabrikation von

Holzbearbeitungsmaschinen GmbH

Günzburger Straße 69

D-89335 Ichenhausen

Dear customer,

we wish you a pleasant and successful working experience

with your new scheppach machine.

Note:

According to the applicable product liability law the man-

ufacturer of this device is not liable for damages which

arise on or in connection with this device in case of:

• improper handling,

• non-compliance with the instructions for use,

• repairs by third party, non authorized skilled workers,

• installation and replacement of non-original spare

parts,

• improper use,

• failures of the electrical system due to the non-

compliance with the electrical speciﬁcations and the

VDE 0100, DIN 57113 / VDE 0113 regulations.

Recommendations:

Read the entire text of the operating instructions prior to the

assembly and operation of the device.

These operating instructions are intended to make it eas-

ier for you to get familiar with your device and utilize its

intended possibilities of use.

The operating instructions contain important notes on how

to work safely, properly and economically with your ma-

chine and how to avoid dangers, save repair costs, reduce

downtime, and increase the reliability and working life of

the machine.

In addition to the safety regulations contained herein, you

must in any case comply with the applicable regulations of

your country with respect to the operation of the machine.

Put the operating instructions in a clear plastic folder to

protect them from dirt and humidity, and store them near

the machine. The instructions must be read and carefully

observed by each operator prior to starting the work. Only

persons who have been trained in the use of the machine

and have been informed on the related dangers and risks

are allowed to use the machine. The required minimum

age must be met.

In addition to the safety notes contained in the present

operating instructions and the special regulations of your

country, the generally recognized technical rules for the

operation of wood working machines must be observed.

General Notes

• When you unpack the device, check all parts for pos-

sible transport damages. In case of complaints the

supplier is to be informed immediately. Complaints

received at a later date will not be acknow ledged.

• Check the delivery for completeness.

• Read the operating instructions to make yourself famil-

iar with the device prior to using it.

• Only use original scheppach parts for accessories as

well as for wearing and spare parts. Spare parts are

available from your specialized dealer.

• Specify our part numbers as well as the type and year

of construction of the device in your orders.

osm 100

Delivery Status

oscillating spindle grinding machine

workbench of massive grey cast iron

6 abrasive sleeves (K80, ø

15/21/28/40/53/77 mm)

5 rubberized grinding rolls (115 mm)

6 table inlays ø 18/25/31/44/57/82

4 spindle discs ø 14/22/46/71

mounting tool

Operation Manual

Technical Data

Dimensions

L x W x H mm 400/365/440

RPM 1/min 2000

Table size mm 370 x 290

Table height mm 330

oscillation stroke

mm 16

grinding height

max. mm 98

ø spindle mm 12,7

vacuum connector

ø mm 38

Gewicht kg 13,5

Drive

Motor V/Hz 230–240/50

Input P1 W 450

Subject to technical changes!

Noise parameters acc. to EN ISO 3744

The indicated rates are emission rates and do not corre-

spond with safe working rates. Although there is a cor-

relation between emission and immission levels, it is not

sure whether reliable precautions are necessary or not.

The following factors can inﬂuence the present immis-

sion level at the working place: Time of impact, property of

working room, other noise sources (for instance, number

of machines and other neighbouring activities. The reli-

able working place rates can also vary from one country

to another. Yet this information should enable the user to

perform a better evaluation of the dangers and risks,

Acoustic power level in dB

Idling LWA = 84 dB(A)

Finishing LWA = 87 dB(A)

A measurement uncertainty allowance K = 3 dB applies to

the mentioned emission values.

Ausstattung Fig. 1

1 ON/OFF switch

2 housing

3 grey cast iron table

4 tool spindle

5 table inlets

6 rubber sleeves

7 abrasive sleeves

8 table inlay slot

9 rubber and abrasive sleeves slot

10 vacuum connector

12 lower spindle disc

13 upper spindle discs (3 pcs.)

a. small 16 mm

b. medium 20 mm

c. large 35 mm

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach OSM100 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info