Bedienungsanleitung Scheppach OX 3-1000 (Seite 13 von 41) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch)

781958

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

english 13

condition ready.

The intervals mentioned here apply for normal operating

conditions; if the machine is heavily used, the intervals

will be shorter accordingly.

Clean the machine panels, covers, and control levers with

a soft cloth, dry or moistened with a little neutral cleaning

agent. Do not use solvents such as alcohol or petrol, as

this might damage the surfaces.

Keep oil and grease out of reach of unauthorized per-

sonnel. Read the instructions on the product containers

carefully and observe them precisely. Avoid direct contact

with skin and wash off well after use.

Accident Prevention Standards

The machine may only be operated by qualiﬁed personnel

who are well aware of the contents of this manual.

Before operating the machinery, you must check the in-

tegrity of the safety mechanisms and ensure that they are

working properly.

Also before operation, you should familiarise yourself with

the machine controls, following the operating instructions.

The speciﬁed capacity of the machine must not be ex-

ceeded. Under no circumstances the machine must be

used for anything else but its indented use.

All personnel must wear work clothes as stated in the

regulations of the country in which the machine is oper-

ated. Wide, loose clothing, belts, rings, and necklaces

should not be worn. Long hair should be tied back.

Try to keep the working area tidy at all times. Tools, acces-

sories, and spanners should be kept within reach.

During cleaning or maintenance work the machine must

not be connected to the mains supply.

It is strictly prohibited to operate the machine without

safety mechanisms or with safety mechanisms disen-

gaged.

It is strictly prohibited to remove or modify safety mecha-

nisms.

You should not carry out any maintenance or adjustments

before having carefully read this manual.

The given maintenance schedule must be observed for

safety reasons as well as to ensure that the machine per-

forms properly.

The warning labels must be always clean and legible and

must be observed in order to avoid accidents. If labels

are damaged or missing or belong to parts that were re-

placed, then those labels must be replaced by original

labels ordered from the manufacturer and be attached at

the positions prescribed.

In case of ﬁre, dry powder ﬁre extinguishing agents must

be used. A burning machine must not be extinguished

with water because of the risk of a short circuit.

If the ﬁre cannot be extinguished immediately, watch for

liquids leaking.

If the ﬁre is more widespread, the oil tank or the pressur-

ised lines can explode: Therefore, make sure that you are

not getting into contact with the leaking liquids.

Dismantling and Disposal

The machine does not contain any materials that are

hazardous to health or the environment, because it is

manufactured from materials that are either completely

recyclable or can be disposed in a normal way.

For disposal, you should use specialist companies or qual-

iﬁed personnel, who know the possible risks and have read

these operating instructions and follow them precisely.

If the machine falls into disuse, follow these steps under

observance of all applicable accident prevention meas-

ures:

• Disconnect the energy supply (electrical or PTO),

• Remove all electrical wires and hand over to a special-

ised collecting point, while observing national regula-

tions.

• Drain the oil tank and deliver the oil in a closed con-

tainer to a collecting point, while observing national

regulations.

• Deliver all other machine parts to a scrap collection

point, while observing national regulations.

Make sure every part of the machine is disposed of in ac-

cordance with all applicable national regulations.

EC Declaration of Compliance

Herewith, we, Scheppach Fabrikation von Holzbearbeitungs-

maschinen GmbH, Günzburger Str. 69, D-89335 Ichenhausen,

Germany, declare that the machinery identiﬁed below based on

its design and type and in the version delivered by us conforms to

the relevant provisions of the EC directives mentioned below.

Any modiﬁcation of the machinery will invalidate this declaration.

Designation of the machinery:

Hydraulic log splitter

Machine type:

OX 3–1000

Order number:

1604 0938

Relevant EC directives:

EC machine directive 2006/42/EG,

EC Low voltage directive 2006/95/EWG,

EC-EMV directive 2004/108/EWG.

Applied harmonised European standards:

EN 12100:2004, EN 13857, EN 574:1997, EN 609-1:1999, EN 982:1996,

EN 60204-1:1998

Notiﬁed body as per annex VII:

Spitzenverband der landwirtschaftlichen Sozialversicherungen,

34114 Kassel, Germany

Place, date:

Ichenhausen, 20.07.2009

Signature:

p.p. Werner Hartmann (product manager)

OX 3-1000 2011.indd 13 07.11.11 12:03

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach OX 3-1000 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info