Bedienungsanleitung Scheppach OX7-1600 (Seite 18 von 38) (Deutsch, Englisch, Französisch)

781945

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

english 13

Familiarise yourself with the two-hand control before op-

erating the machine! Read the operating instructions thor-

oughly.

Additional warnings without symbols:

• Do not remove the casing.

In this operating manual, points concerning your safety will be

marked with this symbol:

m General Safety Instructions

WARNING: If you use electric tools, you should observe the

general safety measures mentioned below in order to reduce

the risk of ﬁ re, electric shock, and injury to people.

Please read all instructions before working with these

tools.

• Observe all safety instructions and warnings for the ma-

chine.

• Keep all safety instructions and warning labels on the

machine complete and in legible condition.

• You must not remove the safety devices on the machine

or make them inoperative.

• Check the power cords. Do not use faulty power cords.

• Check that the two-hand control is functioning correctly

before operation.

• The operator must be at least 18 years of age. Trainees

must be at least 16 years old, but may only work with the

machine under supervision.

• Wear work gloves during work.

• Attention during work: injury hazard to ﬁ ngers and

hands.

• When splitting heavy or bulky materials, use appropriate

appliance for support.

• Switch motor off for retooling, adjustment, and clean-

ing, as well as for maintenance and troubleshooting. Pull

power plug!

• Installation, repairs and maintenance work on the elec-

trical installation may only be carried out by qualiﬁ ed

personnel.

• All guards and safety mechanisms must be reinstalled

immediately after completing the repairs or the mainte-

nance work.

• The adjustments on the hydraulic valve and on the cont-

rol levers must not be changed. Risk of accident and of

destruction of the hydraulic components!

• Switch the motor off when leaving the working area. Pull

power plug!

Additional Safety Instructions for Log Splitters

• The log splitter may only be operated by a single per-

son.

• Wear protective gear (goggles/ visor, gloves, safety boots)

to protect yourself from possible injuries.

• Never split logs with nails, wire or other objects in

them.

• Logs already split and shavings pose a threat within the

working area. There is the risk of tripping, slipping, or

falling. Always keep the working area tidy.

• Never put your hands on moving parts while the machine

is switched on.

• Only split logs with a maximal length of 1,130 mm.

m Intended Use

This machine complies with the current EC machinery direc-

tive.

• The hydraulic log splitter is designed for “stationary op-

eration”, logs may only be split standing upright and

along the grain. The dimensions of the logs to be split:

Short logs 54 cm

logs cut to length 105 cm

• Never split logs lying horizontally or across the grain.

• The manufacture’s safety, working, and maintenance in-

structions as well the dimensions stated in the technical

speciﬁ cations must be observed.

• The applicable rules for accident prevention and other

generally accepted rules concerning safety must be

obeyed.

• The machine may only be operated, serviced, or repaired

by persons familiar with it and aware of the risks. Arbi-

trary modiﬁ cations of the machine exclude any liability

of the manufacture for damages arising from this.

• The machine may only be used with original accessories

and original tools from the manufacturer.

• Every other use will be considered to be unintended use.

The manufacturer assumes no liability for damages aris-

ing from this and it will be solely at the operator’s own

risk.

m Residual Risks

The machine was designed according to the state of the

art and accepted safety standards. However, residual risks

might occur during work.

• Risk of ﬁ nger or hand injury by the cutting knife due to

improper guidance or placement of the log.

• Injuries by the work piece being catapulted out of ma-

chine due to improper clamping or guidance.

• Electrical hazard due to use of improper power cords.

• Furthermore there might be non-obvious remaining risks

despite all precautions.

• Residual risks can be reduced if safety instructions,

intended use, as well as all operating instructions are

observed.

Components, Fig. 1

1 Control and operating lever

2 Push button with emergency power-off switch

3 Valve

4 Run-up lock

5 Holding arms

6 Splitting knife

7 Fixing bolt

8 Supporting wheel (without triple-point)

9 Triple point

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach OX7-1600 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info