Bedienungsanleitung Scheppach SP 2111 Spero (Seite 14 von 32) (Deutsch, Englisch, Holländisch)

782273

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

8 Mitre adjustment screw

9 Mitre square

10 90-degree adjustment screw

11 Saw blade

12 Suction nozzle

13 Motor

14 Shaft locking mechanism

15 Adjustment screw for guide rail

SP 2111

Scope of delivery

plunge cut saw

Hexagon head wrench 5mm

Operating instructions

Technical Data

Dimensions

L x W x H mm 305 x 230 x 245

Saw blade ø mm /

number of teeth 145 / 24Z

Thickness of saw

blade 2,4 mm

Idling speed n0 5500 min-1

Mitre square 0°–45°

Depth of cut 90° mm 45

Depth of cut 45° mm 35

Weight kg 4,2

Drive

Motor V/Hz 230–240/50

Input W 1010

Protection class II

Operating noise level and vibrations

Sound pressure level LpA: 87,7 dB(A), KpA: 3 dB(A)

Sound power level LwA: 98,7 dB(A), KwA: 3 dB(A)

Typical weighted

vibrations ah = 2,1 m/s², K = 1,5m/s²

Measured values corresponding to EN 60 745-2-5 and EN 60 745-1

Subject to technical modiﬁcations!

Warning: Noise can have adverse health effects. Should

the noise level increase above 85 dB(A), you must wear

ear protection. Should the electrical supply not be op-

timal, then the current can drop for a short time when

the machine is turned on. This can inﬂuence other equip-

ment (for example, the blinking of a lamp). Should the

electrical capacity have a Zmax < 0.27, such disturbanc-

es are not to be expected. (Should you have difﬁculties,

please consult your local dealer.)

General notes

• After unpacking, check all parts for any transport dam-

age. Inform the supplier immediately of any faults.

• Later complaints cannot be considered.

• Make sure the delivery is complete.

• Before putting into operation, familiarize yourself with

the machine by carefully reading these instructions.

• Use only original Spero accessories, wearing or re-

place ment parts. You can ﬁnd replacement parts at

your Spero dealer.

• When ordering, include our item number and the type

and year of construction of the machine.

In these operating instructions we have marked the places

that have to do with your safety with this sign: m

NOTE:

According to the applicable product liability law the man-

ufacturer of this device is not liable for damages which

arise on or in connection with this device in case of:

• improper handling,

• non-compliance with the instructions for use,

• repairs by third party, non authorized skilled workers,

• installation and replacement of non-original spare

parts,

• improper use,

• failures of the electrical system due to the non-com-

pliance with the electrical speciﬁcations and the

VDE 0100, DIN 57113 / VDE 0113 regulations

RECOMMENDATIONS:

Read the entire text of the operating instructions prior to

the assembly and operation of the device.

These operating instructions are intended to make it eas-

ier for you to get familiar with your device and utilize its

intended possibilities of use.

The operating instructions contain important notes on

how to work safely, properly and economically with your

machine and how to avoid dangers, save repair costs, re-

duce downtime, and increase the reliability and working

life of the machine.

In addition to the safety regulations contained herein, you

must in any case comply with the applicable regulations

of your country with respect to the operation of the ma-

chine.

Put the operating instructions in a clear plastic folder to

protect them from dirt and humidity, and store them near

the machine. The instructions must be read and carefully

observed by each operator prior to starting the work. Only

persons who have been trained in the use of the machine

and have been informed on the related dangers and risks

are allowed to use the machine. The required minimum

age must be met.

In addition to the safety notes contained in the present

operating instructions and the special regulations of your

country, the generally recognized technical rules for the

operation of wood working machines must be observed.

Read the operating instructions before

beginning work with this power tool.

Wear ear and eye protection.

Wear breathing protection.

LEGENDE VON FIG. 1

1 Handle/hand grip

2 Front handle

3 Plunge-cut trigger

4 On/off switch

5 Base plate

6 Adjustment screw for depth of cut

7 Scale for depth of cut

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach SP 2111 Spero Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info