Bedienungsanleitung Scheppach SP 2111 Spero (Seite 15 von 32) (Deutsch, Englisch, Holländisch)

782273

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

supply, or is carried. If you have your ﬁnger on the switch

of the tool while carrying it, or have the tool turned on,

or connected to a power supply, this behaviour can lead

to accidents.

d) Remove the adjustment aides or the spanners before

turning on the power tool. A tool or wrench that is located

in a rotating part of the machine, can lead to injuries.

e) Avoid abnormal posture. Make sure that the operator

is standing ﬁrmly and can maintain balance. This allows

the operator to maintain control over the power tool in

unexpected situations.

f) Wear appropriate clothing. Do not wear loose clothing

or jewellery. Keep hair, clothing and gloves away from the

moving parts. Loose clothing, jewellery or long hair can

get caught in the moving parts.

g) If dust vacuums or catching systems can be installed

on the tool, make sure that these are correctly connec-

ted and assembled. The use of a dust exhaust unit can

reduce hazards caused by dust.

4) Use and treatment of the power tool

a) Do not overtax the tool. Use the appropriate tool for

the work that is to be done. With the correct power tool,

you can work better and more safely.

b) Do not use a power tool where the switch is defective.

A power tool that cannot be turned on and off is dange-

rous and must be repaired.

c) Disconnect the plug from the wall outlet before you

make adjustments to the tool, change parts or put the

tool away. This precaution prevents inadvertent start-

ups of the tool.

d) Store power tools that are not in use out of reach of

children. Do not let anyone use the tool who does not

have experience with it, or who has not read these ins-

tructions. Power tools can be dangerous when they are

used by inexperienced people.

e) Take good care of your power tools. Make sure that

movable parts function properly and do not jam, see

that parts which inﬂuence the use of the machine are

not broken or damaged. Repair damaged parts before

operating the tool. Many accidents are caused by poorly

maintained power tools.

f) Keep cutting edges sharp and clean. Properly maintai-

ned cutting tools with sharp cutting edges jam less often

and are easier to control.

g) Use power tools, accessories, and equipment accor-

ding to these instructions. Taking into account the wor-

king conditions and the work being performed.

The use of power tools other than those intended for the

tool itself can lead to dangerous situations.

5) Service

a) Only let qualiﬁed service personnel repair your tool

and always use original replacement parts. This guaran-

tees that the power tool remains safe to use.

m General safety instructions for power tools

• WARNING Read all warnings and instructions. Failure to

apply all warnings and instructions can lead to elec-

trical shock, ﬁre and/or serious injury.

• Keep all warnings and instructions handy for future con-

sultation.

• The term “power tool” used in the warnings refers to po-

wer tools that are connected to a source of electrical

energy (with an electrical cable)

1) Workplace safety

a) Keep your working area clean and well lit. Cluttered or

dimly lit workspaces can lead to accidents.

b) Do not operate power tools in areas where explosions

could take place, or in which ﬂammable liquids, gases

or dust are present. Power tools can create sparks, which

can cause dust or fumes to ignite.

c) Keep children and bystanders away from the power

tool when it is being used. Distractions could cause you

to lose control over the equipment.

2) Electrical safety

a) The terminal plug of the tool must ﬁt into the outlet.

The plug may not be modiﬁed in any way. Do not use an

adaptor plug together with grounded power tools. The

original plugs and the appropriate outlets reduce the risk

of an electrical shock.

b) Avoid contact with grounded surfaces, such as pipes,

radiators, stoves and refrigerators. There is an increased

risk of electrical shock, if your body is grounded.

c) Keep power tools away from rain or wet conditions.

Penetration of water into the power tool increases the

risk of electrical shock.

d) Do not use the cable for any purpose other than that

for which it was made. Do not use it to carry the tool,

hang it up, or to pull the plug out of the outlet. Keep

the cable away from heat, oil, sharp corners or parts of

the equipment that move. Damaged or entangled cords

increase the risk of electrical shock.

e) When operating the power tool outdoors, only use ex-

tension cords that are suitable for outdoor use. The use

of an appropriate extension cord reduces the risk of an

electrical shock.

f) If the power tool must be used in a damp environment,

use a residual current protective device. The use of such

a device reduces the risk of electrical shock.

3) Personal safety

a) Be attentive, watch what you are doing and use the

power tool sensibly. Do not use power tools when you are

tired or under the inﬂuence of drugs, alcohol or medici-

nes. One moment of inattention while using a power tool

can result in serious injury.

b) Wear personal protective equipment and always wear

protective glasses. Wearing personal protective equip-

ment, such as a dust mask, slip-free safety shoes, pro-

tective headwear or ear protection, depending on the

type and use of a power tool reduces the risk of injury.

c) Avoid unintentional start-ups. Make sure that the po-

wer tool is shut off before it is connected to the power

Scheppach SP 2111 Spero Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info