Bedienungsanleitung Scheppach TS2800 Primaster (Seite 23 von 48) (Deutsch, Englisch, Französisch)

782536

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

23 І 48

2. Machine description (Fig. A)

1. On/off switch

2. Longitudinal stop

3. Saw blade

4. Protective cover

5. Extraction hose

6. Riving knive

7. Stage centre

8. Table extension

9. Wheel kit

10. Extraction connection piece

11. Transport handle

12. Height adjustment wheel

3. Scope of delivery

• Open the packaging and remove the device care-

fully.

• Remove the packaging material as well as the

packaging and transport bracing (if available).

• Check that the delivery is complete.

• Check the device and accessory parts for trans-

port damage.

• If possible, store the packaging until the warranty

period has expired.

Attention

The device and packaging materials are not toys!

Children must not be allowed to play with plastic

bags, lm and small parts! There is a risk of swal-

lowing and suffocation!

4. Intended use

The bench-type circular saw is designed for the slit-

ting and cross-cutting of all types of timber, commen-

surate with the machine’s size.

The machine is not to be used for cutting any type of

roundwood.

The machine is to be used only for its prescribed pur-

pose. Any use other than that mentioned is consid-

ered to be a case of misuse. The user/operator and

not the manufacturer shall be liable for any damage

or injury resulting such cases of misuse.

The machine is to be operated only with suitable saw

blades. It is prohibited to use any type of cutting-off

wheel. To use the machine properly you must also

observe the safety regulations, the assembly instruc-

tions and the operating instructions to be found in this

manual. All persons who use and service the machine

have to be acquainted with this manual and must be

informed about its potential hazards. It is also impera-

tive to observe the accident prevention regulations in

force in your area. The same applies for the general

rules of occupational health and safety.

Important!

When using the equipment, a few safety precautions

must be observed to avoid injuries and damage.

1. Introduction

Manufacturer:

Woodster GmbH

Günzburger Straße 69

D-89335 Ichenhausen

Dear Customer,

We hope your new tool brings you much enjoyment

and success.

Note:

According to the applicable product liability laws, the

manufacturer of the device does not assume liability

for damages to the product or damages caused by

the product that occurs due to:

• Improper handling,

• Non-compliance of the operating instructions,

• Repairs by third parties, not by authorized service

technicians,

• Installation and replacement of non-original spare

parts,

• Application other than specied,

• A breakdown of the electrical system that occurs

due to the non-compliance of the electric regu-

lations and VDE regulations 0100, DIN 57113 /

VDE0113.

We recom1mend:

Read through the complete text in the operating in-

structions before installing and commissioning the

device. The operating instructions are intended to

help the user to become familiar with the machine

and take advantage of its application possibilities in

accordance with the recommendations. The operat-

ing instructions contain important information on how

to operate the machine safely, professionally and

economically, how to avoid danger, costly repairs, re-

duce downtimes and how to increase reliability and

service life of the machine.

In addition to the safety regulations in the operating

instructions, you have to meet the applicable regula-

tions that apply for the operation of the machine in

your country. Keep the operating instructions pack-

age with the machine at all times and store it in a

plastic cover to protect it from dirt and moisture. Read

the instruction manual each time before operating

the machine and carefully follow its information. The

machine can only be operated by persons who were

instructed concerning the operation of the machine

and who are informed about the associated dangers.

The minimum age requirement must be complied

with. In addition to the safety requirements in these

operating instructions and your country’s applicable

regulations, you should observe the generally rec-

ognized technical rules concerning the operation of

woodworking machines.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach TS2800 Primaster Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info