Bedienungsanleitung Scheppach TS2800 Primaster (Seite 25 von 48) (Deutsch, Englisch, Französisch)

782536

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

25 І 48

Additional safety instructions

Safety precautions

–Warning! Do not use damaged, cracked or de-

formed saw blades.

–Replace a worn table insert.

–Only use saw blades recommended by the

manufacturer which conform to EN 847-1.

m Warning! Keep attention When changing the

saw blade.The cutting width is not smaller and

the main blade thickness of the saw blade is not

greater than the thickness of the gap wedge!

–Make sure that a suitable saw blade for the mate-

rial to be cut is selected.

–Wear suitable personal protective equipment.

This includes:

Hearing protection to avoid the risk of becoming

hearing impaired,

Respiratory protection to avoid the risk of inhaling

harmful dust,

–Wear gloves when handling saw blades and rough

materials.

–Carry saw blades in a container whenever practi-

cal.

–Wear goggles. Sparks generated during work or

splinters, chippings and dust coming from the

device can lead to loss of eyesight.

–Connect a dust collecting device to the electric

tool when sawing wood. The emission of dust is

inuenced, among other things, by the type of

material to be processed, the signicance of local

separation (collection or source) and the correct

setting of the hood/guide plates/guides.

–Do not use saw blades made of high-speed alloy

steel (HSS steel).

–In times of non-use keep the push stick or the

push block with the electrical power tool in its

holder at all times.

Maintenance and repair

–Pull out the mains plug for any adjustment or re-

pair tasks.

–The generation of noise is inuenced by vari-

ous factors, including the characteristics of saw

blades, condition of saw blade and electric tool.

Use saw blades which were designed for reduced

noise development, insofar as possible. Maintain

the electric tool and tool attachments regularly

and if necessary, initiate repairs in order to re-

duce noise.

–Report faults on the electric tool, protective de-

vices or the tool attachment to the person respon-

sible for safety as soon as they are discovered.

Safe work

–Use the push stick or handle with sliding wood,

to pass the workpiece securely out off the saw

blade.

–Make sure that the riving knife is always used,

and set up is correctly.

–During non-use of the electric tool or prior to

maintenance and when replacing tools such as

saw blades, bits, milling heads.

–When the saw blade is blocked due to abnormal

feed force during cutting, turn the machine off

and disconnect it from power supply. Remove the

work piece and ensure that the saw blade runs

free. Turn the machine on and start new cutting

operation with reduced feed force.

15 Do not leave a tool key inserted

–Before switching on, make sure that keys and

adjusting tools are removed.

16 Avoid inadvertent starting

–Make sure that the switch is switched off when

plugging the plug into an outlet.

17 Use extension cables for outdoors

–Only use approved and appropriately identied

extension cables for use outdoors.

–Only use cable reels in the unrolled state.

18 Remain attentive

–Pay attention to what you are doing. Remain sen-

sible when working. Do not use the electric tool

when you are distracted.

19 Check the electric tool for potential damage

–Protective devices and other parts must be care-

fully inspected to ensure that they are fault-free

and function as intended prior to continued use

of the electric tool.

–Check whether the moving parts function fault-

lessly and do not jam or whether parts are dam-

aged. All parts must be correctly mounted and all

conditions must be fullled to ensure fault-free

operation of the electric tool.

–The moving protective hood may not be xed in

the open position.

–Damaged protective devices and parts must be

properly repaired or replaced by a recognised

workshop, insofar as nothing different is specied

in the operating manual.

–Damaged switches must be replaced at a cus-

tomer service workshop.

–Do not use any faulty or damaged connection

cables.

–Do not use any electric tool on which the switch

cannot be switched on and off.

20 Attention!

–Exercise elevated caution for double mitre cuts.

21 Attention!

–The use of other insertion tools and other acces-

sories can entail a risk of injury.

22 Have your electric tool repaired by a qualied

electrician

–This electric tool conforms to the applicable safety

regulations. Repairs may only be performed by an

electrician using original spare parts. Otherwise

accidents can occur.

23 Do not use the cable for purposes for which it is

not intended

–Do not use the cable to pull the plug out of the

outlet. Protect the cable from heat, oil and sharp

edges.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach TS2800 Primaster Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info