Bedienungsanleitung Scheppach TS2800 Primaster (Seite 27 von 48) (Deutsch, Englisch, Französisch)

782536

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

27 І 48

Attachment

Important. Pull out the power plug before carrying out

any maintenance, resetting or assembly work on the

circular saw!

Place all parts supplied on a at surface. Grouping

equal parts.

Note: If compounds with a bolt (round head / or hexa-

gon), hex nuts and washers are backed up, the wash-

er must be tted under the nut.

Insert screws each from outside to inside. Secure

connections with nuts on the inside.

Note: Tighten the nuts and bolts during assembly

only to the extent that they can not fall down.

If you tighten the nuts and bolts prior to nal assem-

bly, nal assembly can not be performed.

Fig. 1

Place the table top (1) onto a work bench after having

removed the packing pad a underneath the motor.

Fig. 1.1

Fasten the base leg (2) onto the table top using 2

hexagon bolts M6 x 16, 2 washers 6 and 2 nuts M6.

Tighten the bolts slightly by hand.

Fig. 2

Fasten the switch (6) to the table top using 2 hexagon

bolts M6 x 16, 2 washers 6, and 2 nuts M6.

Fig. 3

Fasten the base leg (3) to the table top using 2 hexa-

gon bolts M6 x 16, 2 washers 6, and 2 nuts M6.

Fig. 4

Fasten the base leg (4) to the table top using 2 hexa-

gon bolts M6 x 16, 2 washers 6, and 2 nuts M6.

Fig. 5

Fasten the base leg (5) and the hose holder to the

table top using 2 hexagon bolts M6 x 16, 2 washers

6, and 2 nuts M6.

Fig. 6 / 6.1

Fasten 2 longitudinal braces (10) and 2 cross braces

(9) onto the base legs (2, 3,4 and 5) using 12 hexa-

gon bolts M6 x 16, 12 washers 6, and 12 nuts M6.

Fig. 7 / 7.1 / 7.2 / 7.3

Fasten the table extension plate (8) with 2 braces

11 and cross brace to the table top using 6 hexagon

bolts M6 x 16, 6 washers 6, and 6 nuts M6.

Tighten the bolts slightly by hand. (The table length

extension (8) can also be used as table width exten-

sion by tting it to the side with the shorter braces.)

Fig. 8

Fasten the suction piece (14) to the lower saw blade

guard (13) using 4 hexagon bolts M4 x 10.

7. Technical Data

AC motor w 400V 50Hz

performance 2800 W

operating mode S6 40%*

Idle speed 2800 min-1

Hard-metal blade ø 315 x ø 30 x 3 mm

Number of teeth 24

table size 800 x 550 (950) mm

Cutting height max. 90° 83 mm

Cutting height max. 45° 49 mm

height adjustment 0 - 83 mm

saw blade swivel 0 - 45°

weight 47 kg

* operating mode S6 40%: Continuous opera-

tion with intermittent loading (playing time 10 min).

Engine protection of to hot warming up:

It´s allowed to run the engine with nominal power maxi-

mum 40% of playing time. After this the machine must run

60% of playing time steadily without load.

Noise values

The total noise values determined in accordance

with EN 61029.

sound pressure level LpA 94,5 dB(A)

uncertainty KpA 3 dB

sound power level LWA 105,2 dB(A)

uncertainty KWA 3 dB

Wear hearing protection.

The effects of noise can cause a loss of hearing.

Total vibration values (vector sum - three directions)

determined in accordance with EN 61029.

8. Attachment and operation

Before starting the equipment

• All covers and safety devices have to be properly

tted before the equipment is switched on.

• It must be possible for the blade to run freely.

• When working with wood that has been processed

before, watch out for foreign bodies such as nails

or screws, etc.

• Before you press the ON/OFF switch check that the

saw blade is tted correctly. Moving parts must run

smoothly.

• Before you connect the equipment to the power

supply make sure the data on the rating plate are

dentical to the mains data.

• Connect the machine to a properly installed pro-

tective contact socket, with at least 16A circuit

breaker.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach TS2800 Primaster Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info