Bedienungsanleitung Scheppach TS2800 Primaster (Seite 30 von 48) (Deutsch, Englisch, Französisch)

782536

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

30 І 48

13. Electrical connection

The electrical motor installed is connected and ready

for operation. The connection complies with the ap-

plicable VDE and DIN provisions.

The customer‘s mains connection as well as the

extension cable used must also comply with these

regulations.

• The product meets the requirements of EN

61000-3-11 and is subject to special connection

conditions. This means that use of the product

at any freely selectable connection point is not

allowed.

• Given unfavorable conditions in the power supply

the product can cause the voltage to uctuate tem-

porarily.

• The product is exclusively intended for use at con-

nection points that have a continuous current-car-

rying capacity of at least 100 Amper phase.

• As the user, you are required to ensure, in consul-

tation with your electric power company if neces-

sary, that the connection point at which you wish

to operate the product meets the specied re-

quirements.

Important information

In the event of an overloading the motor will switch

itself off. After a cool-down period (time varies) the

motor can be switched back on again.

Damaged electrical connection cable

The insulation on electrical connection cables is of-

ten damaged.

This may have the following causes:

• Passage points, where connection cables are

passed through windows or doors.

• Kinks where the connection cable has been im-

properly fastened or routed.

• Places where the connection cables have been cut

due to being driven over.

• Insulation damage due to being ripped out of the

wall outlet.

• Cracks due to the insulation ageing.

Such damaged electrical connection cables must not

be used and are life-threatening due to the insula-

tion damage.

Check the electrical connection cables for damage

regularly. Make sure that the connection cable does

not hang on the power network during the inspection.

Electrical connection cables must comply with the

applicable VDE and DIN provisions. Only use con-

nection cables with the marking „H07RN-F“.

The printing of the type designation on the connec-

tion cable is mandatory.

Three-phase motor

• The mains voltage must be 400 V~.

• Extension cables up to 25 m long must have a

cross-section of 1.5 mm2.

Connections and repairs of electrical equipment may

only be carried out by an electrician.

Please provide the following information in the event

of any enquiries:

Type of current for the motor

• Machine data - type plate

14. Disposal and recycling

The equipment is supplied in packaging to preven it

from being damaged in transit. The raw materials in

this packaging can be reused or recycled. The equip-

ment and its accessories are made of various types

of material, such as metal and plastic. Defective

components must be disposed of as special waste.

Ask your dealer or your local council.

Old devices must not be disposed of with

household waste!

This symbol indicates that this product must

not be disposed of together with dome-

stic waste in compliance with the Directive

(2012/19/EU) pertaining to waste electrical

and electronic equipment (WEEE).

This product must be disposed of at a designated

collection point. This can occur, for example, by han-

ding it in at an authorised collecting point for the re-

cycling of waste electrical and electronic equipment.

Improper handling of waste equipment may have ne-

gative consequences for the environment and hu-

man health due to potentially hazardous substances

that are often contained in electrical and electronic

equipment. By properly disposing of this product, you

are also contributing to the effective use of natu-

ral resources. You can obtain information on collec-

tion points for waste equipment from your municipal

administration, public waste disposal authority, an

authorised body for the disposal of waste electri-

cal and electronic equipment or your waste disposal

company.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach TS2800 Primaster Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info