Bedienungsanleitung Scheppach Wox D 700SL (Seite 17 von 48) (Deutsch, Englisch, Französisch)

781864

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58  www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

17GB

1. Introduction

Manufacturer:

scheppach Fabrikation von Holzbearbeitung-

smaschinen GmbH

Günzburger Straße 69

D-89335 Ichenhausen

Dear client,

We hope you enjoy your new rewood circular saw

and wish you success with it.

INFORMATION:

The manufacturer of this tool is, according to the

current product liability law, not liable for damages

caused to or by this tool because of:

• incorrect usage,

• failure to observe the manual,

• repairs by third parties, not authorized specialists,

• tting and exchange of non-original exchange

parts,

• non-intended use,

• falling out of the electrical installations because of

inobservance of the electrical Rules and VDE-Reg-

ulations 0100, DIN 57113 / VDE0113.

We recommend that you:

Read the entire operating instructions before

assembling and implementing.

This instruction manual should make it easier for you

to get to know your machine and to use its range of

applications as intended.

The manual contains important information on how to

work with the machine in a secure, correct and ef-

cient way, and how you can avoid risks, save repair

costs, reduce down time and increase the reliability

and life span of the machine.

Apart from the safety rules mentioned in these oper-

ating instructions, you should implicitly pay attention

to the valid regulations of your country for the use of

the machine.

Keep the manual, in a plastic cover protected against

dirt and humidity, with the machine. They should be

read and observed carefully by every member of staff

before starting to work. Only people instructed on

how to use the machine and informed about the pos-

sible risks, should be allowed to use it. The required

minimum age is to be adhered to.

Besides the safety instructions in this manual and the

special regulations of your country the recognized

technical rules for the operation of wood processing

machines need to be observed.

General instructions

• After unpacking please check all parts for possible

damage during transport. In case of complaints the

driver needs to be contacted as soon as possible.

• Complaints coming in later will not be recognized

as such.

• Familiarize yourself with the machine by means of

the operating instructions before implementing it.

• In case of replacing worn or exchange parts, as

for accessories, only use original parts. You can

obtain exchange parts at the specialized dealer.

• Upon ordering, please specify our article nº´s as

well as type and year of construction of the tool.

2. Safety instructions

• In these operation instructions we have indicated

positions that concern your safety, with this mark: m

• Take due note of all this information before and

while working with the saw.

• Do not lose these safety regulations.

• When equipment is not being used it should be

kept in a dry, closed place out of childrens reach.

• Keep mounted attachments sharp and clean to

enable you to work well and safely.

• Pay attention to - What you do. Always work in

accordance with the regulations. Do not use the

tool when you are tired.

• Do not use tools that do not allow to turned on and

off the switch.

• Warning! The use of other tools and accessories

may put you at risk of injury.

• Warning: Always unplug the power plug or remove

the spark plug connector prior to starting any of

the maintenance work described in this manual.

• Give these safety regulations to all persons who

work on the machine.

• Caution! Hands and ngers may be injured on the

rotating saw blade.

• Do not leave the saw in the rain and never use it

in damp or wet conditions.

• Provide good lighting.

• Do not saw near ammable liquids or gases.

• Wear suitable work clothes! Loose garments or

jewelry may become caught up in the rotating saw

blade.

• Non-slip shoes are recommended when working

outdoors.

• Wear a hair net if you have long hair.

• Avoid abnormal working postures.

• Operators must be at least 16 years of age.

• Keep children away from the machine when the

motor is running.

• Keep your workplace clean of wood scrap and any

unnecessary objects.

• An untidy work area invites accidents.

• Do not allow other persons, especially children, to

touch the tool. Keep them out of your work area.

• Persons working on the machine should not be

distracted.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach Wox D 700SL Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info