Bedienungsanleitung Scheppach Wox D 700SL (Seite 19 von 48) (Deutsch, Englisch, Französisch)

781864

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58  www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

19GB

• Workpieces must be completely free of foreign ob-

jects, i.e. nails or screws.

• The machine must only be used in technically per-

fect condition in accordance with its designated

use and the instructions set out in the operating

manual, and only by safety-conscious persons who

are fully aware of the risks involved in operating

the machine. Any functional disorders, especially

those affecting the safety of the machine, should

therefore be rectied immediately.

• The manufacturer’s safety instructions, operating

instructions and maintenance instructions as well

as the dimensions given in the technical data must

be observed.

• The applicable accident prevention regulations

and other generally accepted safety regulations

must be complied with.

• The machine may only be used, maintained, and

operated by persons familiar with it and instructed

in its operation and procedures. Arbitrary altera-

tions to the machine release the manufacturer from

all responsibility for any resulting damages.

• The machine may only be used with original acces-

sories and original tools made by the manufacturer.

• Any other use exceeds authorization. The manu-

facturer is not responsible for any damages result-

ing from unauthorized use; risk is the sole

responsibility of the operator.

• Only use saw blades that comply with the Euro-

pean standard DIN EN 847-1.

• Ensure adequate lighting.

• Make sure that the machine is secure on the ground

when installing the machine.

• The area around the machine must be free of trip

hazards.

• The machine may only be operated outdoors with-

out exhaust.

4. Other risks

The machine has been built using modern tech-

nology in accordance with recognized safety

rules. Some remaining hazards, however, may

still exist.

• The rotating saw blade can cause injuries to ngers

and hands if the work piece is incorrectly fed.

• Danger to health from wood dusts or wood chips.

• Always wear personal protective equipment such

as eye protection and dust mask.

• Noise can be a health hazard. The permitted noise

level is exceeded when working. Be sure to wear

personal protective gear such as ear protection.

• Hazardous current, when using improper electrical

connections.

• Even when all safety measures are taken, some

remaining hazards which are not yet evident may

still be present.

• Remaining hazards can be minimized by following

the instructions in “Safety Precautions“, “Proper

Use“ and in the entire operating manual.

• Defective saw blades can cause injuries. Regularly

inspect the structural integrity of saw blades.

• The operating instructions supplied with the special

accessories must be observed and carefully read

when Scheppach special accessories are used.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Scheppach Wox D 700SL Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info