Bedienungsanleitung Schwinn 130i (Seite 24 von 36) (Englisch)

671371

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Edit User Profile

1. From the Power-Up Mode screen, push the Increase() or Decrease() buttons to select one of the User Proﬁles.

2. Push the OK button to select the User Profile.

3. The Console display shows the EDIT prompt and the current User Profile name. Push OK to start the Edit User Proﬁle

option.

To exit the Edit User Proﬁle option, push the PAUSE/END button and the console will go back to the Power-Up Mode

screen.

4. The Console display shows the NAME prompt and the current User Profile name.

Note: The User name will be blank if this is the first edit. The name of a User Profile is limited to 10 characters.

The currently active segment will flash. Use the Increase/Decrease buttons to move through the alphabet and blank space

(found between A and Z). To set each segment, use the Left() or Right() buttons to shift between segments.

Push the OK button to accept the displayed User name.

5. To edit the other User data (EDIT AGE, EDIT WEIGHT, EDIT HEIGHT, EDIT GENDER), use the Increase/Decrease buttons

to adjust, and push OK to set each entry.

6. The Console display shows the SCAN prompt. This option controls how the workout values are displayed during a

workout. The “OFF” setting allows the user to push the Right() or Left() buttons to view the other workout value

channels when desired. The “ON” setting allows the Console to automatically display the workout value channels every 6

seconds.

The default is “OFF”.

Push the OK button to set how the workout values are displayed.

7. The Console display shows the EDIT LOWER DISPLAY prompt. This option allows you to customize which Workout Values

are displayed during a workout.

The Lower Display will show all of the workout values, with the active Workout Value flashing. The Upper Display shows

the active value setting: “ON” or “OFF”. Push the Increase() or Decrease() buttons to hide the active workout value, and

push the Left) or Right() buttons to shift the active value.

Note: To show a hidden workout value, repeat procedure and change Upper Display value to “ON” for that value.

When done with customizing the Lower Display, push the OK button to set it.

8. The Console will go to the Power-Up Mode screen with the user selected.

Reset a User Profile

1. From the Power-Up Mode screen, push the Increase() or Decrease() buttons to select one of the User Proﬁles.

2. Push the OK button to select the User Profile.

3. The Console display shows the current User Profile name and the EDIT prompt. Push the Increase() or Decrease()

buttons to change the prompt.

Note: To exit the Edit User Proﬁle option, push the PAUSE/END button and the console will go back to the Power-Up

Mode screen.

4. The Console display shows the RESET prompt and the current User Profile name. Push OK to start the Reset User Proﬁle

option.

5. The Console will now confirm the request to reset the User profile (the default selection is ‘NO’). Push the Increase() or

Decrease() buttons to adjust the selection.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Schwinn 130i Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Schwinn 130i

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info